We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS plastic closet flange spigot fitting four inch pipe size

Value Brand

Value Brand 4 In ABS Closet Flange Spigot

SKU CH-5QZQ-WX8TX

A 4-inch ABS closet flange with a spigot connection, rated for temperatures from -40 to 180 °F and conforming to ASTM D3965 cell class 32222

  • ABS construction resists corrosion and impact
  • Spigot connection fits directly into 4-inch pipe
  • Withstands temperatures from -40 to 180 degrees F
  • Meets ASTM D3965 cell class 32222
  • Ready for residential and commercial waste lines

4 In ABS Closet Flange Spigot

The Value Brand 4 In ABS closet flange spigot connects a toilet outlet to a 4 inch drainage pipe. Its spigot end fits inside a hub fitting for a solvent-weld joint. The fitting is moulded from ABS and conforms to cell class 32222 per ASTM D3965.

Installers needing a 4 inch spigot connection

Plumbers and DIYers joining a closet bend to a 4 inch ABS hub will find this flange suitable. It does not serve installations that require a hub connection or a different pipe diameter.

Performs across a wide temperature range

The ABS material withstands continuous service from -40 to 180 deg F without softening or cracking. Cell class 32222 compliance confirms consistent impact strength and rigidity under sustained thermal cycling.

Highlights

  • ABS construction resists corrosion and impact
  • Spigot connection fits directly into 4-inch pipe
  • Withstands temperatures from -40 to 180 degrees F
  • Meets ASTM D3965 cell class 32222
  • Ready for residential and commercial waste lines

Specifications

BrandCHARLOTTE PIPE AND FOUNDRY CO.

Questions about this item

What size ABS pipe do I need to solvent-weld this 4 in spigot flange?

The spigot connection is made for 4 in ABS pipe; use ABS cement rated for the material and follow local code for joint preparation and cure time.

Can I connect this ABS flange to an existing PVC drain line?

ABS and PVC require a transition coupling approved for the joint; a direct solvent weld between the two materials is not code-compliant.

How do I confirm the flange is seated correctly after installation?

The flange should sit flush on the finished floor with the bolt slots aligned for the closet bolts and no rocking when the toilet is set.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.