Value Brand
Value Brand 4-in-1 Soldering Station 75 W Desoldering 650 W Hot Air 60 W Iron Suction Pen °F/°C
Integrates 75 W desoldering, 650 W hot air, 60 W soldering and a suction pen with PID control, °C/°F display and three preset channels per tool
- TypeSoldering Guns, Irons & Stations
- Four tools in one unit: 75 W desoldering, 650 W hot air, 60 W iron, suction pen
- PID temperature control keeps each station stable within ±1.8 °F
- Three preset channels per station let you recall temperatures instantly
- Hot air delivers up to 120 L airflow with auto/manual modes and cool/hot switch
- Desoldering vacuum pump at 0.05 MPa with four nozzle sizes handles BGA, PLCC, SOIC, QFP
One Unit, Four Integrated Tools
This station combines a 75-Watt desoldering station, a 650-Watt hot air rework station, a 60-Watt soldering iron and a suction pen in a single chassis. Each module operates independently with its own power switch and three preset memory channels. A built-in CPU monitors component status and reports error codes such as S-E or F-1/F-2 for quick troubleshooting.
Repair Shops and Advanced Hobbyists
The wide temperature spans suit component-level board work, BGA reflow and through-hole desoldering. Buyers who only need occasional through-hole soldering or simple wire tinning will find the feature set excessive. The unit also does not serve applications requiring microscope integration or nitrogen-assisted soldering environments.
Accessories Extend Component Coverage
Four desoldering nozzles at Ø .8, 1.0, 1.2 and 2.0 mm plus three suction pads at Ø 3.0, 6.5 and 10 mm let the station handle BGA, PLCC, SOIC, QFP and similar packages. The hot air gun delivers up to 120 L maximum airflow with automatic and manual modes, while the soldering iron offers an adjustable sleep timer and in-holder sleep detection. Digital calibration and °C/°F switching complete the kit.
Highlights
- Four tools in one unit: 75 W desoldering, 650 W hot air, 60 W iron, suction pen
- PID temperature control keeps each station stable within ±1.8 °F
- Three preset channels per station let you recall temperatures instantly
- Hot air delivers up to 120 L airflow with auto/manual modes and cool/hot switch
- Desoldering vacuum pump at 0.05 MPa with four nozzle sizes handles BGA, PLCC, SOIC, QFP
Specifications
| Type | Soldering Guns, Irons & Stations |
|---|
Questions about this item
What power supply is needed for the 75 W desoldering and 650 W hot air functions?
The station runs from a single mains connection; the 75 W desoldering iron, 650 W hot air gun and 60 W soldering iron all draw power through the same unit.
Can I keep using my existing Ø 1.0 mm desoldering nozzles with this station?
Yes — the desoldering gun accepts Ø .8, 1.0, 1.2 and 2.0 mm nozzles, so a Ø 1.0 mm tip fits directly.
How do I verify the hot air rework station is holding temperature correctly after setup?
The display shows real-time temperature with ± 1.8 °F stability; PID stabilization and the 3 preset channels let you confirm consistent output at up to 896 °F.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
