Value Brand
Value Brand 3LX58 Double-Bolt Hose Clamp 15/16"W Zinc-Plated Steel
Zinc-plated steel double-bolt hose clamp adjusts from 3 1/2 to 3 13/16 inches with 10 mm hex and 40 ft-lb torque
- Double-bolt design secures high-vibration compressor hoses
- Zinc-plated steel band resists corrosion in damp environments
- 10 mm hex allows quick tightening with standard tools
- 40 ft-lb torque rating prevents clamp slip under pressure
- 15/16 in band width distributes load evenly
ZORO SELECT 3LX58 Double-Bolt Clamp
This ZORO SELECT 3LX58 double-bolt hose clamp is built from zinc-plated steel for use on compressor hoses and low-pressure pneumatic couplings. The band measures 15/16 in wide and 0.315 in thick, with a 10 mm hex screw for tightening. It fits inside diameters between 3 1/2 in and 3 13/16 in at 40 ft-lb install torque. Mechanics and shop technicians choose it for secure hose retention.
Suited for industrial air lines
The clamp serves technicians who need a wide, heavy-duty band on large-bore hose. Buyers who want a lighter worm-drive style for smaller tubing should look at something else. It is not intended for high-pressure hydraulic circuits or applications that require a constant-tension spring design. The SAE number is not applicable, so verify fit against your specific coupling standard.
Holds rated diameter under continuous vibration
Under sustained compressor vibration the double-bolt design distributes clamping force across the 15/16 in band, maintaining seal integrity at the specified 40 ft-lb torque. Zinc plating on both band and screw resists corrosion during extended shop use. The 10 mm hex allows reliable re-torquing without rounding. Performance stays consistent within the 3 1/2 in to 3 13/16 in range.
Highlights
- Double-bolt design secures high-vibration compressor hoses
- Zinc-plated steel band resists corrosion in damp environments
- 10 mm hex allows quick tightening with standard tools
- 40 ft-lb torque rating prevents clamp slip under pressure
- 15/16 in band width distributes load evenly
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What hose outside diameter range does the 15/16"W double-bolt clamp cover?
The clamp fits hoses with inside diameters from 3 1/2 in to 3 13/16 in, so the hose OD must fall inside that window.
Will the 10 mm hex head clear my existing 3/8" drive socket set?
Yes, a standard 10 mm socket on a 3/8" drive engages the screw head without interference.
How do I confirm the clamp is torqued to the 40 ft-lb install value?
Use a calibrated torque wrench on the 10 mm hex and tighten until the wrench clicks at 40 ft-lb.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
