We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium cam and groove coupling with hose shank and locking arm

Value Brand

Value Brand 3LW96 Cam and Groove Coupling 1 in Aluminum

SKU CH-V4QV-BWRFV

Aluminum cam-and-groove coupling connects 1 in hose with Buna-N gasket and locking arm, rated 250 psi at 70 F

  • Aluminum body resists corrosion for longer service life
  • Type C cam-and-groove design enables quick tool-free hose connections
  • 1 in hose shank fits standard 1 in ID hose without adapters
  • Buna-N gasket seals reliably up to 250 psi at 70 F
  • Locking arm included secures coupling against accidental disconnection

Application & Fit

This cam and groove coupling is a Type C socket designed for a 1 inch hose inner diameter with a male hose shank connection. It suits fluid-transfer assemblies in agricultural, industrial or mobile-equipment plumbing where quick, tool-free connections are required.

Capacity & Pressure Limits

The aluminium body accepts a maximum working pressure of 250 psi at 70 °F, with a socket inside diameter of 1 15/32 inches and an overall length of 3 55/64 inches. Buna-N gasket material handles common water, oil and mild chemical media but is not rated for aggressive solvents or sustained temperatures above the stated limit.

Thermal, Noise & Power Behaviour

As a passive mechanical fitting the component generates no heat, draws no power and produces no audible noise during operation. The locking arm secures the joint without additional hardware, and the aluminium construction resists corrosion in typical outdoor or wash-down environments.

Highlights

  • Aluminum body resists corrosion for longer service life
  • Type C cam-and-groove design enables quick tool-free hose connections
  • 1 in hose shank fits standard 1 in ID hose without adapters
  • Buna-N gasket seals reliably up to 250 psi at 70 F
  • Locking arm included secures coupling against accidental disconnection

Specifications

BrandZORO SELECT

Questions about this item

Will the 1-inch hose shank on this coupling fit the 1-inch hose I already use?

Yes, the hose shank is sized for 1-inch hose I.D., so it will connect directly to your existing 1-inch hose without adapters.

How can I confirm the locking arm is engaged after I push the cam levers down?

The locking arm snaps over the cam levers when they are fully closed; you should see the arm seated flat against both levers with no gap.

Does the box include a Buna-N gasket or do I need to buy one separately?

A Buna-N gasket is included inside the socket, so no separate gasket purchase is required for initial installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.