We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium cam-and-groove adapter, 1 inch NPT, silver finish

Value Brand

Value Brand 3LW92 Cam and Groove Adapter 1 in Aluminum

SKU CH-9KZW-CPH7R

A 1-inch aluminum cam-and-groove adapter with female NPT threads rated to 250 psi at 70°F

  • 1 in NPT female thread fits standard plumbing
  • 250 psi rating at 70 °F handles demanding pressure
  • Aluminium body resists corrosion in wet environments
  • Cam-and-groove Type A design enables quick connect
  • Compact 1 31/32 in length suits tight spaces

Cam and Groove Adapter 1 in

The Value Brand 3LW92 is a Type A cam and groove adapter with a 1 in coupling size. It provides a female NPT thread for connecting to a male NPT fitting in fluid transfer systems.

250 psi Working Pressure

Rated for a maximum working pressure of 250 psi at 70 F, it handles typical industrial water and chemical lines. Pressure spikes above this limit or extreme temperatures will exceed its design capacity.

Aluminum Body and No Locking Arm

The aluminum construction offers corrosion resistance for many fluids while keeping weight low. The absence of a locking arm means the connection relies solely on the cam lever engagement for security.

Highlights

  • 1 in NPT female thread fits standard plumbing
  • 250 psi rating at 70 °F handles demanding pressure
  • Aluminium body resists corrosion in wet environments
  • Cam-and-groove Type A design enables quick connect
  • Compact 1 31/32 in length suits tight spaces

Specifications

BrandZORO SELECT

Questions about this item

Will the 1 in NPT thread on this adapter match the 1 in NPT threads on my existing hoses?

Yes, the adapter uses a 1 in -11-1/2 NPT thread size, which is the standard for 1 in NPT fittings.

How can I confirm the 250 psi rating is holding after I install it?

Pressurise the system to its normal operating pressure and check the cam arms and threaded joint for any sign of leakage.

Does the box include a gasket or sealing washer for the 1 in FNPT connection?

The supplied components are the aluminum adapter body and cam arms only; a suitable NPT thread sealant or tape must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.