Value Brand
Value Brand 3G150 Rigid Semi-Pneumatic Caster 200 lb
A rigid semi-pneumatic caster with a 200 lb load rating for wheelbarrows and carts
- TypeWheelbarrows & Carts
- 200 lb load rating supports heavy carts
- 6 1/4 inch wheel diameter rolls over rough ground
- Rigid plate mount keeps wheels tracking straight
- Semi-pneumatic rubber tire absorbs shock without air
- Ribbed tread pattern adds grip on wet surfaces
Rigid plate caster for yard equipment
The Value Brand 3G150 is a rigid plate caster built for wheelbarrows and carts. It carries a 200 lb load rating on a single 6 1/4 inch diameter wheel. The ribbed rubber tread provides grip on mixed surfaces. No brake is fitted to this model.
Fixed mounting frees swivel space
A rigid caster bolts directly to a frame and does not rotate, so it tracks straight under load. Pair it with swivel casters on the opposite end to create a steerable cart. The 1 7/8 inch wheel width distributes weight without needing extra hardware.
Suits light-duty hauling on flat ground
This caster fits garden carts and utility wagons that stay under the 200 lb limit. Buyers who need a brake, non-marking tread or a higher capacity should look at something else. It is not intended for powered equipment or rough terrain.
Highlights
- 200 lb load rating supports heavy carts
- 6 1/4 inch wheel diameter rolls over rough ground
- Rigid plate mount keeps wheels tracking straight
- Semi-pneumatic rubber tire absorbs shock without air
- Ribbed tread pattern adds grip on wet surfaces
Specifications
| Brand | Zoro Select |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
How much weight can the 200 lb load rating handle before the wheel shows wear?
The caster is rated for a maximum load of 200 lb; exceeding this limit will accelerate tread wear and may cause premature failure.
Does the rubber tread generate noticeable heat or noise during continuous rolling?
The semi-pneumatic rubber wheel runs quietly and stays cool under normal use because the ribbed tread dissipates heat without internal air pressure.
What mounting hardware is required to attach the rigid plate to my equipment?
You will need four bolts or screws that match the plate's hole pattern; the caster itself supplies only the top plate and wheel assembly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
