We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short galvanized steel pipe nipple with threaded ends

Value Brand

Value Brand 3/8" MNPT x 1-1/2" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-GAFV-K61TR

Galvanized steel pipe nipple with 3/8 inch MNPT threads, Schedule 40 rating, 1-1/2 inch length, 300 psi maximum operating pressure at 150 degrees F, corrosion-resistant welded construction for air.

  • Corrosion-resistant finish extends service life in wet environments
  • Galvanized steel construction withstands 300 psi at 150°F for air, gas, water
  • Electric-resistance weld ensures leak-free joints under pressure
  • Schedule 40 rating matches standard piping systems
  • 3/8" MNPT threads connect directly to compatible fittings

Application Suitability

This galvanised steel nipple connects air, gas or potable-water lines that require Schedule 40 compatibility. The 3/8 inch nominal size and 1-1/2 inch overall length suit tight plumbing runs where a male NPT thread is needed on each end.

Installation Notes

Electric-resistance welded construction provides consistent threads for reliable sealing with standard pipe dope or tape. The 43/64 inch outside diameter matches Schedule 40 fittings, so no special adapters are required; mis-threading is the most common issue if the installer cross-starts the connection.

Sustained Load Behaviour

Rated for 300 psi at 150 degrees F and 150 psi steam at 350 degrees F, the nipple maintains integrity under continuous pressure and temperature cycles. The galvanised coating resists corrosion during extended service in water or compressed-air systems.

Highlights

  • Corrosion-resistant finish extends service life in wet environments
  • Galvanized steel construction withstands 300 psi at 150°F for air, gas, water
  • Electric-resistance weld ensures leak-free joints under pressure
  • Schedule 40 rating matches standard piping systems
  • 3/8" MNPT threads connect directly to compatible fittings

Specifications

BrandZORO SELECT

Questions about this item

How can I verify the nipple is holding pressure after installation?

Pressurise the line up to 300 psi at 150 Degrees F for air, gas or potable water, or 150 psi at 350 Degrees F for steam, and check for leaks at the MNPT threads.

What comes in the package and what must I supply?

The box contains the 3/8 in Schedule 40 galvanised steel nipple with 43/64 in outside diameter and 1-1/2 in overall length; you must provide thread sealant and matching Schedule 40 fittings.

Which version of this nipple should I choose for my system?

Select the 3/8 in MNPT x 1-1/2 in TBE Schedule 40 nipple when your design calls for a 300 psi pressure rating and welded galvanised steel construction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.