We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized carbon steel pipe nipple, threaded both ends, 2 ft length

Value Brand

Value Brand 3/4" MNPT x 2 ft TBE Carbon Steel Pipe Nipple Sch 40

SKU CH-1XEV-Y36HP

Galvanized carbon steel nipple with MNPT threads on both ends, Schedule 40 wall rated to 1454 psi at 650 °F

  • Galvanized carbon steel resists corrosion
  • Schedule 40 wall thickness rated to 1454 psi at 650 °F
  • Threaded both ends with MNPT connections for quick assembly
  • Electric resistance welded seam meets ASTM A-53 and A-733 standards
  • Nominal 3/4 in size with 0.824 in bore and 1.05 in outside diameter

3/4" MNPT Carbon Steel Nipple

This 2 ft threaded pipe nipple is made from galvanized carbon steel with a Schedule 40 wall. It suits plumbers, maintenance crews and DIY installers who need a reliable conduit for water, air or gas lines in residential or light commercial systems.

Check thread type and pressure rating

Verify that your existing fittings use MNPT threads and that the system pressure stays below 1454 psi at 650 degrees F. Confirm the 0.824 in inside diameter and 1.05 in outside diameter match the pipe size you are joining before ordering.

Fits standard Schedule 40 assemblies

The electric-resistance-welded construction meets ASTM A-53 and ASTM A-733 standards for dimensional consistency. It threads directly into matching couplings, valves or equipment ports, freeing you from cutting and threading raw pipe on site.

Highlights

  • Galvanized carbon steel resists corrosion
  • Schedule 40 wall thickness rated to 1454 psi at 650 °F
  • Threaded both ends with MNPT connections for quick assembly
  • Electric resistance welded seam meets ASTM A-53 and A-733 standards
  • Nominal 3/4 in size with 0.824 in bore and 1.05 in outside diameter

Specifications

BrandZORO SELECT

Questions about this item

Does the 3/4 in MNPT nipple come with any sealant or gaskets, or must those be purchased separately?

The nipple is supplied as a single threaded pipe; thread sealant, tape or gaskets are not included and must be bought separately.

The listing shows only one length — how do I decide if the 2 ft Sch 40 nipple is the right choice?

Choose the 2 ft length when your pipe run requires exactly that centre-to-centre distance; other lengths are not offered in this SKU.

What does the 1454 psi @ 650 Degrees F rating mean for a typical hot-water heating system?

It means the nipple can safely handle pressures up to 1454 psi at temperatures up to 650 °F, well above normal hydronic heating conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.