We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 90 degree street elbow with FNPT x MNPT ends

Value Brand

Value Brand 3/4" FNPT x MNPT Galvanized 90 Degree Street Elbow

SKU CH-19W3-887QB

Galvanised malleable-iron 90-degree street elbow connects 3/4-inch FNPT to MNPT, rated 300 psi at 150 °F and compliant with ASME B16.3, B16.4, ASTM A197, A47, FM, NSF-61, AB1953 and UL listings

  • 3/4 inch FNPT x MNPT street elbow directs flow at a 90 degree angle
  • Galvanized malleable iron body resists corrosion in water and steam systems
  • Class 150 rating handles 300 psi water oil gas at 150 degrees F
  • Meets ASME B16.3 B16.4 ASTM A197 A47 FM NSF61 AB1953 UL standards
  • California Proposition 65 warning for cancer and reproductive harm chemicals

3/4" Galvanized Street Elbow

This galvanized malleable iron street elbow provides a 90-degree turn between 3/4-inch female and male NPT threads. It is rated for 300 psi water, oil or gas at 150 degrees Fahrenheit and 150 psi saturated steam. Compliance with ASME B 16.3, B 16.4, ASTM A-197, ASTM A47, FM, NSF-61, AB1953 and UL listings makes it suitable for potable water and gas distribution systems.

Class 150 Threaded Connection

The FNPT x MNPT street configuration lets the elbow thread directly into a female fitting without a separate nipple, reducing joint count and potential leak paths. Galvanized coating protects the iron against corrosion in water supply and compressed air lines. Threads conform to ASME B 16.3 and B 16.4 dimensions for reliable sealing with standard pipe dope or tape.

California Proposition 65 Notice

This product contains a chemical identified by the State of California as a cause of cancer and reproductive harm. Installers should follow standard safety practices such as wearing gloves and washing hands after handling. No additional accessories, gaskets or software are supplied with the fitting.

Highlights

  • 3/4 inch FNPT x MNPT street elbow directs flow at a 90 degree angle
  • Galvanized malleable iron body resists corrosion in water and steam systems
  • Class 150 rating handles 300 psi water oil gas at 150 degrees F
  • Meets ASME B16.3 B16.4 ASTM A197 A47 FM NSF61 AB1953 UL standards
  • California Proposition 65 warning for cancer and reproductive harm chemicals

Specifications

BrandZORO SELECT

Questions about this item

Does the Class 150 rating limit the fitting to 300 psi at 150 °F WOG?

Yes, the maximum working pressure is 300 psi at 150 °F WOG, and saturated steam is rated at 150 psi.

What pipe size and thread type does this street elbow require?

It fits 3/4 in pipe with FNPT x MNPT threads on galvanized malleable iron.

How do you install it without damaging the galvanized coating?

Apply thread sealant to the male threads, hand-tighten, then finish with a wrench on the hex flats — avoid over-tightening which can crack the fitting or strip the coating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.