We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Value Brand

Value Brand 2ERP7 Amber Strobe Warning Light 12-80V DC

SKU CH-CFBM-PJQAC

Amber strobe warning light operates on 12 to 80V DC with 72 flashes per minute and 150,000 candela output

  • ColorAmber
  • Amber strobe delivers 150 000 candela visibility
  • 72 flashes per minute capture immediate attention
  • 12 to 80 V DC input suits varied fleets
  • NEMA 4X rating withstands harsh environments
  • 8 000 hour lamp life reduces replacement frequency

Amber Strobe Warning Light

The Value Brand 2ERP7 is an amber strobe warning light designed for facility and traffic safety applications. It operates on a 12 to 80V DC power source and delivers a light output of 150,000 candela at 72 flashes per minute. This unit suits vehicle fleets, loading docks and industrial sites requiring high-visibility signalling.

Polycarbonate Dome and ABS Housing

The light features a polycarbonate dome lens mounted on an ABS housing rated NEMA 4X for dust and water resistance. Surface mounting allows direct attachment to flat panels, machinery or vehicle roofs without additional brackets. The wire power connection supports the full 12 to 80V DC range with a current draw of 0.049 to 0.33A DC.

Wide Temperature Range Operation

Rated for an operating temperature span of -31 degrees to 150 degrees F, the strobe maintains performance in extreme cold and heat. The strobe tube is rated for an 8,000 hour lamp life, reducing replacement frequency in continuous-duty cycles. Low current draw minimises electrical load across the supported voltage range.

Highlights

  • Amber strobe delivers 150 000 candela visibility
  • 72 flashes per minute capture immediate attention
  • 12 to 80 V DC input suits varied fleets
  • NEMA 4X rating withstands harsh environments
  • 8 000 hour lamp life reduces replacement frequency

Specifications

ColorAmber
BrandZORO SELECT

Questions about this item

What voltage range does the 12 to 80V DC strobe light support?

The unit operates on any DC supply from 12 to 80 volts, drawing 0.049 to 0.33 amps depending on the input voltage.

What are the mounting dimensions and surface type for this amber warning light?

The housing measures 2 4/5 inches deep by 5 1/4 inches high and is designed for direct surface mounting on flat panels or brackets.

How is the strobe light wired, and which step is most often missed?

Connect the two supply wires to a 12–80 V DC source with correct polarity; the step most often missed is verifying the voltage before applying power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.