We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fanless rack-mount switch with 24 PoE+ ports and two SFP uplinks

Value Brand

Value Brand 26 Port Gigabit PoE+ Switch 24 Port 2 SFP 300W Fanless Unmanaged

SKU CH-V0W4-DRKS6

24 Gigabit PoE+ ports and 2 SFP uplinks deliver 52 Gbps switching with 300 W total power in a fanless, unmanaged design

  • 24 PoE+ ports deliver up to 30 W each for powering cameras and access points
  • 300 W total PoE budget supports multiple high-draw devices without an external injector
  • Fanless design gives silent operation in offices, classrooms or recording spaces
  • Two Gigabit SFP uplinks enable fibre links to core switches or servers
  • Extended mode on ports 17-24 reaches 250 m at 10 Mbps for long cable runs

26-Port Gigabit PoE+ Switch

This 26-port Gigabit switch provides 24 PoE+ ports and two SFP uplink ports for fibre connections. A 300 W power budget delivers up to 30 W per port under the IEEE 802.3af/at standard. Fanless, rack-mountable and unmanaged, it operates silently with plug-and-play simplicity.

Who this suits and who should look elsewhere

Installers powering IP cameras, wireless access points or VoIP phones over cable runs up to 250 metres at 10 Mbps on ports 17-24 will benefit. Buyers needing managed features such as SNMP, port mirroring or Layer 3 routing cannot use this switch. Networks requiring active cooling or redundant power supplies should consider other models.

300 W PoE budget across 24 ports

The single specification that decides fit is the 300 W total PoE budget shared across all 24 PoE+ ports. Calculate the combined draw of every powered device; if the total exceeds 300 W, this unit cannot supply enough power.

Highlights

  • 24 PoE+ ports deliver up to 30 W each for powering cameras and access points
  • 300 W total PoE budget supports multiple high-draw devices without an external injector
  • Fanless design gives silent operation in offices, classrooms or recording spaces
  • Two Gigabit SFP uplinks enable fibre links to core switches or servers
  • Extended mode on ports 17-24 reaches 250 m at 10 Mbps for long cable runs

Specifications

No published specifications for this item yet.

Questions about this item

How do I install this 26-port PoE+ switch and what step is often missed?

Mount the fanless unit in a rack, connect the 24 PoE+ ports and 2 SFP uplinks, then power on. The step often missed is verifying each device needs IEEE 802.3af/at — the switch will not power passive 24V or non-PoE gear.

What maintenance or replacement will this switch need over time?

The built-in 300W power supply is the only field-replaceable part; fanless design means no fan swaps. Keep ventilation clear so the 52Gbps switching capacity runs within thermal limits.

Which limit appears first when all 24 PoE+ ports run at full load continuously?

The 300W total PoE budget caps sustained output — at 30W per port you can only power 10 ports at maximum simultaneously before the budget is exhausted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.