We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS schedule 40 elbow fitting, 22-1/2 degree bend, 2 inch hub connections

Value Brand

Value Brand 22-1/2 Deg Elbow 2 In Hub Schedule 40

SKU CH-1DDB-5E3JN

ABS Schedule 40 elbow redirects flow 22-1/2° at hub-to-hub joints, rated from -40 °F to 180 °F per ASTM D3965 cell class 32222

  • 22-1/2° angle enables gradual directional changes in piping
  • Hub-to-hub connection joins two plain-end ABS pipes directly
  • Schedule 40 wall thickness handles standard pressure requirements
  • ABS material operates from -40 °F to 180 °F
  • Meets ASTM D3965 cell class 32222 for material quality

Fitting Type & Angle

This is a 22-1/2 degree elbow fitting made from ABS pipe material with a Schedule 40 rating. It uses a hub-to-hub connection for joining two pipes of the same size. The fitting conforms to ASTM D3965 cell class 32222 and operates between -40 and 180 degrees Fahrenheit. It is supplied new and ready for installation.

Suitable Installations

This fitting suits plumbing systems requiring a slight directional change using a 2 inch hub connection and Schedule 40 dimensions. It is not for installations needing a different angle, a different pipe diameter, or a different connection method such as spigot or threaded ends. Builders using other schedules or materials should verify compatibility before purchase.

Critical Specification

The hub-to-hub connection type determines whether this elbow matches the existing piping. Both ends must accept a 2 inch pipe inserted into the hub for a solvent-weld joint. If the system uses spigot ends, threaded connections, or a different pipe size, this fitting will not work.

Highlights

  • 22-1/2° angle enables gradual directional changes in piping
  • Hub-to-hub connection joins two plain-end ABS pipes directly
  • Schedule 40 wall thickness handles standard pressure requirements
  • ABS material operates from -40 °F to 180 °F
  • Meets ASTM D3965 cell class 32222 for material quality

Specifications

BrandZORO SELECT

Questions about this item

How do I install the 2 in hub Schedule 40 elbow, and what step do people get wrong?

Apply ABS solvent cement to both hub sockets, insert the pipe fully into each hub, and hold the joint for the recommended set time; the step most often missed is cleaning and priming both surfaces before cementing.

What maintenance or replacement will the ABS elbow need later?

Inspect joints periodically for cracks or leaks; the fitting itself requires no scheduled maintenance and is replaced only if physical damage or joint failure occurs.

What is the temperature limit that appears first under sustained use?

The fitting is rated for continuous service up to 180 degrees F, beyond which the ABS material may soften and lose pressure integrity.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.