We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS 22-1/2 degree elbow hub-to-hub Schedule 40 fitting

Value Brand

Value Brand 22-1/2 Deg Elbow 1-1/2 In Hub x Hub Schedule 40

SKU CH-CPG8-6RV76

A 22-1/2 degree ABS elbow joins 1-1/2 inch hub connections in Schedule 40 systems

  • ABS construction resists corrosion in drain systems
  • 22-1/2 degree angle enables gradual flow direction changes
  • Hub-to-hub solvent weld creates permanent leak-free joints
  • Schedule 40 wall handles pressure in residential plumbing
  • ASTM D3965 cell class 32222 certifies material quality

22-1/2 Degree Elbow for ABS Pipe

This 22-1/2 degree elbow connects two 1-1/2 inch ABS pipes using a hub-by-hub joint. It is manufactured to Schedule 40 dimensions and meets ASTM D3965 cell class 32222. The fitting suits residential and commercial drain, waste and vent systems where a gentle directional change is required.

Check pipe material and solvent cement

Verify that the existing pipe is ABS and not PVC, because the solvent cement must match the material. Confirm the pipe outside diameter matches the 1-1/2 inch hub size so the joint seats fully. Ensure local code accepts Schedule 40 ABS fittings for the intended drainage application before installation.

Temperature performance under continuous flow

The fitting is rated for continuous service from -40 degrees to 180 degrees Fahrenheit. Within this range the ABS material retains its rigidity and impact resistance during sustained hot-water discharge. Prolonged exposure near the upper limit will not cause softening that compromises the hub seal.

Highlights

  • ABS construction resists corrosion in drain systems
  • 22-1/2 degree angle enables gradual flow direction changes
  • Hub-to-hub solvent weld creates permanent leak-free joints
  • Schedule 40 wall handles pressure in residential plumbing
  • ASTM D3965 cell class 32222 certifies material quality

Specifications

BrandZORO SELECT

Questions about this item

What comes in the box and is anything else needed to install it?

The box contains one 22-1/2 degree Schedule 40 ABS elbow with hub connections on both ends. Solvent cement and primer rated for ABS are required to join it to pipe but are not included.

Why select the Schedule 40 version over other classes?

Schedule 40 matches standard 1-1/2 inch ABS pipe dimensions and pressure ratings. Cell class 32222 per ASTM D3965 confirms the material meets that schedule's requirements.

What does the 180 degree Fahrenheit temperature limit mean for a drain line?

The fitting handles continuous discharge up to 180 degrees Fahrenheit, covering typical residential hot-water waste. Exceeding that temperature can soften the ABS material.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.