Value Brand
Value Brand 20 Pole 2 Row Terminal Strip 15 A 300 V 14 AWG Screw
A 20-pole, dual-row barrier terminal strip rated for 15 A at 300 V with screw terminals accepting 22 to 14 AWG wire
- Engine BrandZORO SELECT
- 20 poles in two rows distribute power across multiple circuits
- 15 A current rating supports standard industrial control loads
- 300 V maximum voltage handles common panel voltages
- 14 AWG maximum wire size accepts typical field wiring
- Phenolic housing resists heat and electrical tracking
20-Pole Barrier Terminal Strip
This 20-pole barrier terminal strip provides two rows of screw connections for industrial power distribution. It accepts wire sizes from 22 AWG up to 14 AWG and is rated for 15 A at 300 V AC. The phenolic housing measures 7.85 in long, 0.89 in wide and 0.45 in high. It suits control panels and machinery wiring where a compact, high-density connection block is required.
Replaces lower-pole or single-row blocks
Upgrading from a strip with fewer poles or a single row consolidates more circuits into the same footprint. The jump is worth it when panel space is limited and you need 20 circuits at 3/8 in centre spacing without adding a second block. It does not serve applications needing higher current per pole or voltage above 300 V AC.
Screw terminals simplify field wiring
Each pole uses a screw clamp that secures solid or stranded wire without special tools. The 3/8 in spacing allows standard hand tools to reach terminals easily. Common issues include over-tightening screws which can crack the phenolic housing, and exceeding the 14 AWG maximum wire gauge which prevents proper clamping. No cover is included, so plan for insulation barriers if required by code.
Highlights
- 20 poles in two rows distribute power across multiple circuits
- 15 A current rating supports standard industrial control loads
- 300 V maximum voltage handles common panel voltages
- 14 AWG maximum wire size accepts typical field wiring
- Phenolic housing resists heat and electrical tracking
Specifications
| Engine Brand | ZORO SELECT |
|---|
Questions about this item
What is the overall length of this 20-pole terminal strip?
The overall length is 7.85 in, so allow that space plus clearance for wiring access on your panel or DIN rail.
How are the wires secured and what size fits the screw terminals?
Strip each wire, insert into the barrier terminal openings, and tighten the screws; the terminals accept 22 AWG to 14 AWG solid or stranded conductors.
Will the phenolic housing need replacement if it discolours from heat?
Phenolic housings are rated for continuous 15 A at 300 V; discolouration indicates overheating, so verify load and connections instead of planning routine replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
