We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black steel pipe nipple with threaded ends

Value Brand

Value Brand 2" x 3-1/2" Black Pipe Nipple Sch 40

SKU CH-PB03-7BZDY

A 2-inch Schedule 40 black steel pipe nipple with threaded ends, rated for 300 psi at 150 °F and 150 psi steam pressure

  • Schedule 40 wall rated for 300 psi pressure
  • Threaded MNPT ends connect to standard fittings
  • Black steel construction resists corrosion in plumbing
  • Electric resistance weld ensures leak-free joints
  • Meets ASTM A-53 Type E and A-733 standards

2-Inch Black Steel Pipe Nipple

This 2-inch nominal black steel pipe nipple is manufactured to Schedule 40 specifications for standard plumbing installations. It serves contractors and maintenance teams who need a reliable threaded connection between female fittings in water, gas, or steam lines.

Electric Resistance Weld Construction

The nipple is produced using electric resistance welding and meets ASTM A-53 Type E and ASTM A-733 Grade B standards for consistent wall thickness. Male NPT threads on both ends allow direct engagement with standard female couplings, valves, or equipment ports without additional adapters.

Rated for 300 PSI Service

With a maximum pressure rating of 300 psi at 150 degrees Fahrenheit and 150 psi for steam service, the fitting covers common residential and light commercial pressure requirements. The 3-1/2 inch overall length provides a fixed spacing between connected components in assembled piping runs.

Highlights

  • Schedule 40 wall rated for 300 psi pressure
  • Threaded MNPT ends connect to standard fittings
  • Black steel construction resists corrosion in plumbing
  • Electric resistance weld ensures leak-free joints
  • Meets ASTM A-53 Type E and A-733 standards

Specifications

BrandZoro Select

Questions about this item

What pressure does the Schedule 40 MNPT thread limit this nipple to in practice?

The threaded MNPT ends on this Schedule 40 nipple are rated for 300 psi at 150 °F and 150 psi steam.

What wall clearance does the 9/64 in thickness and 2 3/8 in OD require for mounting?

The 9/64 in wall and 2 3/8 in outside diameter need a hole or bracket sized for that OD plus thread engagement.

How do you seal the MNPT threads without cracking the female fitting?

Apply PTFE tape or pipe dope to the male threads, hand-tighten, then turn one to two full turns with a wrench — stop before the joint bottoms out.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.