We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 9 inch red brass pipe nipple with male threads on both ends

Value Brand

Value Brand 2" MNPT x 9" Red Brass Pipe Nipple Sch 40

SKU CH-EH95-1K33P

A 9-inch Schedule 40 red brass nipple with 2-inch male NPT threads on both ends, rated to 125 PSI from 20 to 400 °F

  • Red brass construction resists corrosion in potable water systems
  • Threaded both ends for direct connection to female NPT fittings
  • Schedule 40 wall rated for 125 PSI working pressure
  • Operates from 20 to 400 degrees Fahrenheit across heating and cooling loops
  • Meets ANSI B1.20.1 and ASTM B687 dimensional and material standards

2" MNPT Red Brass Nipple

The Value Brand 2" MNPT x 9" red brass pipe nipple is a Schedule 40 fitting threaded on both ends for joining two female NPT connections. It suits plumbing, hydraulic and compressed-air systems where a 9-inch centre-to-centre span is required. The red brass construction resists dezincification in potable-water service.

Threaded NPT Limits

The male NPT threads seal by taper engagement and demand proper thread sealant or tape to prevent leakage. The Schedule 40 wall withstands 125 PSI at temperatures from 20 to 400 degrees F. Exceeding either limit risks joint failure or thread distortion. ANSI B 1.20.1 governs the thread form and gauging.

9" Overall Length Decides Fit

The 9-inch overall length is the single dimension that determines whether this nipple bridges the gap between your two fittings. Measure the required face-to-face distance including thread engagement before ordering. A shorter or longer nipple will not compensate for an incorrect layout.

Highlights

  • Red brass construction resists corrosion in potable water systems
  • Threaded both ends for direct connection to female NPT fittings
  • Schedule 40 wall rated for 125 PSI working pressure
  • Operates from 20 to 400 degrees Fahrenheit across heating and cooling loops
  • Meets ANSI B1.20.1 and ASTM B687 dimensional and material standards

Specifications

BrandZORO SELECT

Questions about this item

How do I choose the correct pipe nipple length and diameter for my plumbing job?

Select a 2 inch nominal size nipple with 9 inch overall length and MNPT threads on both ends to match your existing 2 inch Schedule 40 piping.

What does the 125 PSI pressure rating mean when the nipple is installed in a working system?

The 125 PSI rating is the maximum working pressure at temperatures up to 400 degrees Fahrenheit for this Schedule 40 red brass nipple.

Which thread standard does the MNPT connection follow and what does it limit in practice?

The MNPT threads conform to ANSI B1.20.1, ensuring compatibility with standard NPT fittings and limiting use to tapered pipe thread connections.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.