We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized carbon steel pipe nipple with threaded ends, 2 ft length

Value Brand

Value Brand 2" MNPT x 2 ft TBE Carbon Steel Pipe Nipple Sch 40

SKU CH-BGM8-17NMZ

Schedule 40 galvanized carbon steel pipe nipple with 2-inch MNPT threads on both ends, 2-foot overall length, rated 940 psi at 650 °F to ANSI B1.20.1 Class 150

  • Galvanized carbon steel resists corrosion
  • Schedule 40 wall rated for 940 psi at 650 °F
  • Threaded both ends for direct MNPT connections
  • Electric resistance weld adds joint strength
  • 2 ft length with 2.067 in inside diameter

2" Schedule 40 Galvanized Carbon Steel Nipple

This 2" MNPT x 2 ft TBE pipe nipple is manufactured from galvanized carbon steel with an electric resistance weld. It conforms to ANSI B 1.20.1 standards and carries a Class 150 rating. The nominal pipe size is 2 inches with an overall length of 2 feet. It suits plumbing installations requiring threaded connections on both ends.

Sustained Load Behaviour

The nipple withstands a maximum pressure of 940 psi at 650 degrees Fahrenheit, indicating performance under combined high pressure and temperature. Schedule 40 wall thickness of 0.154 inches provides the structural basis for this rating. Galvanized coating adds corrosion resistance for extended service life in water or air lines. Metal detectable construction aids pipeline location.

Installation Checks

Verify that your system uses 2" MNPT threads matching the nipple's male ends. Confirm the 2.067 inch inside diameter and 2.875 inch outside diameter align with adjacent fittings and flow requirements. Ensure the Schedule 40 pressure class meets or exceeds your design pressure at operating temperature. Check that galvanized carbon steel is compatible with the conveyed fluid.

Highlights

  • Galvanized carbon steel resists corrosion
  • Schedule 40 wall rated for 940 psi at 650 °F
  • Threaded both ends for direct MNPT connections
  • Electric resistance weld adds joint strength
  • 2 ft length with 2.067 in inside diameter

Specifications

BrandZORO SELECT

Questions about this item

How hot can the 2 in Schedule 40 nipple get while holding 940 psi?

The galvanized carbon steel nipple is rated for 940 psi at 650 °F, so it handles continuous high-temperature service within that limit.

What thread standard must my existing fittings match for this nipple to seal?

It uses MNPT threads on both ends built to ANSI B 1.20.1, so any Class 150 NPT female fitting will engage correctly.

Will the 2.875 in outside diameter clear the same holes I drilled for standard 2 in pipe?

Yes — 2.875 in OD is the standard Schedule 40 size for 2 in nominal pipe, so existing openings and supports will fit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.