We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two-inch malleable iron ninety-degree elbow with threaded ends

Value Brand

Value Brand 2" Malleable Iron 90 Degree Elbow

SKU CH-VR16-8R17J

A 2-inch malleable iron 90-degree elbow connects pipes with FNPT threads, rated to 1500 psi at 150°F and 300 psi saturated steam, meeting ASME B16.3, B16.4 and ASTM A197, A47 standards

  • 90-degree flow change with malleable iron strength
  • Class 300 rating supports 1500 psi at 150 °F
  • FM Approved and UL Listed for code compliance
  • ASME B 16.3 and B 16.4 plus ASTM A-197 and A47 standards
  • Wide -20 °F to 550 °F range for steam or water systems

2-inch Class 300 Malleable Iron Elbow

This 2-inch malleable iron elbow provides a 90-degree change of direction in threaded piping systems. It is rated Class 300 and carries ASME B 16.3 and B 16.4 compliance together with FM and UL listings. The fitting suits installers who need a durable, code-recognised component for high-pressure water, oil or gas lines.

Sustained pressure and temperature performance

The body withstands a maximum pressure of 1500 psi at 150 degrees F and handles saturated steam up to 300 psi. Its ASTM A-197 and ASTM A47 malleable iron construction remains stable across a continuous range from -20 degrees to 550 degrees F. This makes it reliable for long-term service in heating, cooling and process piping that cycles between temperature extremes.

FNPT threads and heavy-duty construction

Female National Pipe Taper threads on both ends allow direct connection to standard 2-inch male pipe without adapters. The Class 300 wall thickness resists mechanical damage and thread deformation during installation and subsequent maintenance. Builders who require a lighter-weight or lower-pressure fitting should select a Class 150 alternative instead.

Highlights

  • 90-degree flow change with malleable iron strength
  • Class 300 rating supports 1500 psi at 150 °F
  • FM Approved and UL Listed for code compliance
  • ASME B 16.3 and B 16.4 plus ASTM A-197 and A47 standards
  • Wide -20 °F to 550 °F range for steam or water systems

Specifications

BrandZORO SELECT

Questions about this item

Does the 1500 psi rating at 150 degrees F change after continuous use?

The malleable iron body and Class 300 rating maintain 1500 psi at 150 degrees F throughout extended operation.

What pipe thread standard must my existing piping follow for the 2 inch FNPT connection?

The fitting uses FNPT threads per ASME B16.3 and B16.4, matching standard NPT pipe threads.

Will the ASTM A197 material handle thermal cycling alongside older steel pipe rated to 300 psi steam?

Yes, the -20 to 550 degrees F range and 300 psi saturated steam rating align with Class 300 steam systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.