We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized carbon steel pipe nipple, threaded both ends, 2 foot 6 inch length

Value Brand

Value Brand 2 in Sch 40 Carbon Steel Pipe Nipple 2 ft 6 in TBE

SKU CH-0PHW-XDWH9

A 2 ft 6 in Schedule 40 carbon steel pipe nipple with 2 in NPT threads for air, gas and potable water up to 940 psi at 650 °F

  • Galvanized coating resists corrosion in air, gas and water systems
  • Sch 40 carbon steel rated for 940 psi at 650 °F
  • 2 in nominal size with 2 ft 6 in length fits standard piping
  • Class 150 compatibility simplifies integration with existing fittings
  • Welded Grade B steel construction operates from -20 °F to 600 °F

2-inch Schedule 40 carbon steel nipple

This 2-inch nominal pipe size nipple is made from welded Grade B carbon steel with a galvanized coating. It measures 2 feet 6 inches overall with threaded both ends for direct connection. The fitting suits air, gas and potable water systems in industrial and commercial plumbing.

Class 150 pressure envelope

The nipple is rated for 940 psi at 650 degrees F for both liquid and steam service. Minimum operating temperature is minus 20 degrees F and maximum is 600 degrees F. Gravity flow is not supported and compatibility is limited to Class 150 flanges and fittings.

Threaded installation notes

Threaded both ends allow quick assembly with standard pipe tools using appropriate sealant. The 2 7/8 inch outside diameter and 2 1/16 inch inside diameter match Schedule 40 dimensions. Careful alignment prevents cross-threading and galvanized coating damage during tightening.

Highlights

  • Galvanized coating resists corrosion in air, gas and water systems
  • Sch 40 carbon steel rated for 940 psi at 650 °F
  • 2 in nominal size with 2 ft 6 in length fits standard piping
  • Class 150 compatibility simplifies integration with existing fittings
  • Welded Grade B steel construction operates from -20 °F to 600 °F

Specifications

BrandZORO SELECT

Questions about this item

Which nominal pipe size and schedule should I choose for a 2-inch system?

This nipple is a 2-inch nominal size in Schedule 40, matching standard Class 150 fittings for air, gas or potable water lines.

What does the 940 psi rating mean when the pipe is installed?

It is the maximum operating pressure at 650 °F; at lower temperatures the same 940 psi limit applies for both water and steam service.

How do the 2-inch male NPT threads and Class 150 rating work together?

The 2-inch MNPT ends thread into Class 150 fittings, and the galvanized carbon steel construction handles up to 940 psi at 650 °F within that class.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.