We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short galvanised steel pipe nipple with threaded ends

Value Brand

Value Brand 2 in MNPT x 2-1/2 in TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-4THR-7RS5K

Connects 2-inch Schedule 40 steel pipe with male NPT and threaded ends for air, gas or water up to 300 psi

  • Corrosion-resistant galvanised coating protects steel pipe
  • Schedule 40 rating suits 300 psi water pressure
  • Electric-resistance weld ensures strong leak-free joints
  • 2-1/2 in overall length fits tight installations
  • Compatible with air, gases and potable water systems

Product identity and intended use

This galvanized steel pipe nipple connects two female-threaded components in Schedule 40 piping systems. It suits plumbing, air and gas lines where a 2 in nominal bore and 2-1/2 in overall length are required.

Capacity and headroom

Rated for 300 psi at 150 degrees F and 150 psi steam at 350 degrees F, it handles typical residential and light commercial pressures. The Schedule 40 wall provides standard mechanical strength but is not rated for high-pressure industrial service beyond these limits.

Thermals noise and power draw

Galvanized coating resists corrosion in water, air and gas service without active cooling or power consumption. Electric-resistance welded construction maintains integrity across the stated temperature range. No moving parts generate noise.

Highlights

  • Corrosion-resistant galvanised coating protects steel pipe
  • Schedule 40 rating suits 300 psi water pressure
  • Electric-resistance weld ensures strong leak-free joints
  • 2-1/2 in overall length fits tight installations
  • Compatible with air, gases and potable water systems

Specifications

BrandZORO SELECT

Questions about this item

Will the 2 in Schedule 40 nipple thread onto my existing galvanized fittings without leaks?

The nipple uses 2 in MNPT threads and is built to Schedule 40 dimensions, so it matches standard galvanized fittings of the same size and schedule.

How can I confirm the 300 psi @ 150 °F rating is holding after installation?

Pressurise the line to its working pressure, then check every joint with leak-detect solution; no bubbles means the 300 psi @ 150 °F seal is intact.

Does the box include thread sealant or do I need to buy tape separately?

Only the galvanized steel nipple is supplied; pipe thread tape or compound must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.