We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Value Brand

Value Brand 2 in CTS Hub CPVC 90 Degree Elbow SDR-11 Light Yellow

SKU CH-C6KF-ZCM3J

A 2-inch CTS hub CPVC elbow turns pipe runs 90 degrees, rated for 100 psi and 180 °F water

  • 90-degree turn routes CPVC pipe in tight spaces
  • SDR-11 wall rated for 100 psi at 180 °F
  • ASTM D2846 compliance confirms potable-water suitability
  • CTS hub connection fits 2-inch tubing without adapters
  • Light yellow colour identifies CPVC material on site

2 in CTS Hub CPVC Elbow

This 90 degree elbow connects two inch CTS hub CPVC pipe in plumbing installations. The SDR-11 class fitting handles pressure up to 100 psi and temperatures up to 180 degrees F. It meets ASTM D2846 standards for hot and cold water distribution systems.

Light Yellow CPVC material

The light yellow CPVC construction resists corrosion and scale buildup in potable water lines. SDR-11 wall thickness provides consistent pressure rating throughout the fitting. Solvent cement joints create permanent leak free connections when installed correctly.

Check pipe size and schedule

Verify your existing pipe is two inch CTS outside diameter and SDR-11 class before ordering. Confirm the system operating pressure does not exceed 100 psi and temperature stays below 180 degrees F. This fitting is restricted from sale in California due to Proposition 65 chemical warnings.

Highlights

  • 90-degree turn routes CPVC pipe in tight spaces
  • SDR-11 wall rated for 100 psi at 180 °F
  • ASTM D2846 compliance confirms potable-water suitability
  • CTS hub connection fits 2-inch tubing without adapters
  • Light yellow colour identifies CPVC material on site

Specifications

BrandZoro Select

Questions about this item

Will the CPVC elbow need any maintenance or replacement after installation?

The CPVC material resists corrosion and scale, so the elbow itself does not require scheduled maintenance; replacement is only needed if physical damage or a leak occurs.

What is the first limit reached when this fitting runs continuously at high temperature?

The maximum operating temperature is 180 °F; exceeding this limit will degrade the CPVC before the 100 psi pressure rating becomes a factor.

Does the elbow generate noise, heat or draw power during all-day operation?

As a passive CPVC fitting it has no moving parts, produces no noise, generates no heat and consumes no power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.