We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A galvanized steel 90-degree elbow fitting with FNPT threads

Value Brand

Value Brand 2" FNPT Galvanized 90 Degree Elbow

SKU CH-CZEN-S1B9C

Galvanized forged steel 90-degree elbow with 2-inch FNPT threads, rated 3000 psi at 72°F

  • 90-degree elbow directs flow efficiently in tight piping layouts
  • Galvanized forged steel construction resists corrosion for long service life
  • Class 3000 rating handles up to 3000 psi at 72°F
  • FNPT threads provide secure, leak-resistant connections to 2-inch pipe
  • Meets ANSI B1.20.1, ASME B16.11 and ASTM A105 standards

Product Identity

This galvanized forged-steel elbow provides a 90-degree change of direction in a 2-inch FNPT piping system. It meets ANSI B1.20.1, ASME B16.11 and ASTM A105 standards for Class 3000 fittings. Installers use it where a sharp turn is required in industrial or commercial plumbing.

Pressure Capacity and Headroom

The fitting withstands a maximum pressure of 3000 psi at 72 degrees Fahrenheit. It comfortably handles high-pressure steam, air, oil or water lines within that rating. Above the rated pressure or temperature the safety margin disappears and deformation or leakage can occur.

Thread Standard Limits

The FNPT connection follows the ANSI B1.20.1 taper-thread specification, which seals through thread interference and requires sealant or tape. It is not compatible with straight-thread or metric port standards. The Class 3000 wall thickness limits use to matching schedule pipe; lighter-wall tubing may not engage enough threads for a reliable joint.

Highlights

  • 90-degree elbow directs flow efficiently in tight piping layouts
  • Galvanized forged steel construction resists corrosion for long service life
  • Class 3000 rating handles up to 3000 psi at 72°F
  • FNPT threads provide secure, leak-resistant connections to 2-inch pipe
  • Meets ANSI B1.20.1, ASME B16.11 and ASTM A105 standards

Specifications

BrandZORO SELECT

Questions about this item

Will this 2 in FNPT galvanized elbow connect to my existing NPT threaded pipe?

Yes, the fitting uses FNPT threads per ANSI B 1.20.1, so it will mate with standard male NPT pipe threads of the same nominal size.

How can I confirm the elbow is holding pressure after installation?

Pressurize the system up to 3000 psi at 72 °F and inspect the joint; no leakage means the Class 3000 forged steel fitting is performing to its rated standard.

Does the box include any sealant, gaskets or additional fittings?

The package contains only the single 90 degree galvanized forged steel elbow; thread sealant, tape or mating nipples must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.