We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised malleable iron 90 degree reducing elbow with threaded female ends

Value Brand

Value Brand 2-1/2" x 2" FNPT Galvanized 90 Deg Reducing Elbow

SKU CH-FNQC-2R9V8

Galvanized malleable iron 90-degree reducing elbow connects 2-1/2 in and 2 in FNPT threads at Class 150, rated 300 psi at 77°F

  • 90-degree flow change with 300 psi pressure rating
  • Galvanized malleable iron resists corrosion in water systems
  • Class 150 Schedule 40 compatibility for standard piping
  • Female NPT threads on both ends for secure connections
  • Reducing design joins 2-1/2 inch to 2 inch pipe sizes

2-1/2" x 2" Galvanized Reducing Elbow

This malleable iron fitting connects a 2-1/2 inch female NPT pipe to a 2 inch female NPT pipe at a 90 degree angle. It is rated Class 150 for Schedule 40 piping systems. The galvanized coating provides corrosion resistance for water, air and oil lines. Installers use it to change direction and reduce pipe size in a single joint.

Sustained pressure performance

The elbow withstands 300 psi at 77 degrees F maximum operating pressure. Grade A malleable iron construction maintains structural integrity under continuous system pressure. Galvanized surfaces resist internal scaling that can restrict flow over time. Threaded joints remain tight through thermal cycling and vibration in fixed installations.

Verify your piping specifications

Confirm both pipe ends use female NPT threads matching the 11.5 threads per inch on the 2 inch side and 8 threads per inch on the 2-1/2 inch side. Ensure the system design accommodates the 3 37/64 inch center-to-end dimension on the larger branch and 2 61/64 inch on the smaller. Check that Schedule 40 wall thickness matches your existing pipe. This fitting is not restricted for sale in any state.

Highlights

  • 90-degree flow change with 300 psi pressure rating
  • Galvanized malleable iron resists corrosion in water systems
  • Class 150 Schedule 40 compatibility for standard piping
  • Female NPT threads on both ends for secure connections
  • Reducing design joins 2-1/2 inch to 2 inch pipe sizes

Specifications

BrandZoro Select

Questions about this item

How much heat does the galvanized elbow generate when water runs through it all day?

The fitting produces no heat of its own; it simply conducts the temperature of the fluid inside.

What pipe schedule must I already have for the 2-1/2 in and 2 in female threads to seal properly?

Both ends are cut for Schedule 40 pipe with 8 and 11.5 threads per inch respectively.

Will the Class 150 rating hold up next to older black-iron pipe rated at the same pressure class?

Yes, the 300 psi maximum at 77 °F matches the Class 150 standard used by legacy malleable-iron systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.