Value Brand 1NGF5 Bimetal Thermometer 5 in Dial 50 to 550F

Industrial temperature monitoring

The Value Brand 1NGF5 bimetal thermometer is built for technicians and maintenance crews who need direct-reading temperature checks on pipes, vessels or process equipment. Its adjustable-angle stem lets the dial face the operator without repositioning the fitting, saving time during routine rounds or troubleshooting.

50 to 550 °F range with 9 in stem

The instrument covers 50 to 550 °F (10 to 290 °C), handling common steam, hot-water and oil-circuit temperatures in HVAC, food-processing and light-industrial plants. Readings become unreliable below the lower limit or above the upper limit, so separate low-temperature or high-temperature gauges are required for cryogenic or furnace service.

1/2 in NPT stainless housing with glass lens

A 1/2 in NPT thread mounts directly into standard taps, and the stainless-steel case with glass lens resists corrosion and vibration in wash-down areas. The 5 in dial diameter gives clear visibility from a distance, while the fixed 9 in stem length means the sensor tip reaches a set depth — plan the insertion point accordingly. No NIST-traceable certificate is included, so users needing documented calibration must arrange separate certification.