Fluke
Fluke SureGrip Master Accessory Set measurement tool 1000 V CAT III 600 V CAT IV
$174.99
0.00208619BTC
In stock
Value Brand
Value Brand 1NGB7 Bimetal Thermometer 5 in Dial 0 to 250°F
Measures temperature from -20 to 120°C with a 5 in dial and 4 in stem in a 304 stainless steel housing
- TypeEnvironmental & Mechanical
- Measures 0-250°F for wide temperature tasks
- Dual °F/°C scale reads -20 to 120°C
- 304 stainless steel housing resists corrosion
- Glass lens protects dial from damage
- Adjustable-angle stem fits tight installations
ZORO SELECT Bimetal Thermometer
This ZORO SELECT dial thermometer measures temperatures from 0 to 250 degrees Fahrenheit and -20 to 120 degrees Celsius. It features a 5 inch dial diameter and a 4 inch stem with a 1/2 inch NPT connection. The housing uses 304 stainless steel and the lens is glass. An adjustable angle allows flexible mounting for environmental and mechanical checks.
HVAC Technicians and Plant Operators
The wide Fahrenheit and Celsius range suits technicians monitoring pipes, tanks or ducts up to 250 degrees Fahrenheit. The 4 inch stem reaches into standard fittings and the adjustable head eases reading from awkward positions. Buyers who need a longer insertion depth or a digital output for data logging should look at a different instrument.
5 Inch Dial with 4 Inch Stem
The 5 inch dial diameter provides clear visibility of the dual scale markings across the full 0 to 250 degree Fahrenheit span. The 4 inch stem length and 1/2 inch NPT thread determine whether the unit fits the specific process connection. Confirm these dimensions match the installation before ordering.
Highlights
- Measures 0-250°F for wide temperature tasks
- Dual °F/°C scale reads -20 to 120°C
- 304 stainless steel housing resists corrosion
- Glass lens protects dial from damage
- Adjustable-angle stem fits tight installations
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Environmental & Mechanical |
Questions about this item
How do I install the 1/2 in NPT stem correctly?
Thread the 4 in stem into a 1/2 in NPT fitting, then rotate the adjustable-angle dial to the viewing position before final tightening to avoid stressing the glass lens.
What maintenance will the bimetal element need over time?
The 304 stainless steel housing and glass lens resist corrosion, but the bimetal coil can drift; plan to verify accuracy against a known reference annually and replace if readings shift beyond your tolerance.
At what temperature does the dial reach its limit during sustained use?
The scale stops at 250 °F (120 °C); continuous exposure near that upper end will peg the pointer and risks permanent calibration loss.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Keson Industries
Keson MP301 Measuring Wheel Orange Tubular Steel Frame Metal Spoked Wheel 999Ft
$88.99
0.00106092BTC
In stock
Bazarc
Bazarc Auto Lock Inspection Loop Amber/Blue measurement tool
- Amber/Blue
$13.99
0.00016679BTC
In stock