Value Brand 160-109 PVC Compression Coupling 2-1/2" Schedule 40 150 psi

2-1/2 Inch PVC Compression Coupling

This Schedule 40 PVC compression coupling fits 2-1/2 inch pipe and is rated for 150 psi maximum operating pressure. It provides a solvent-free connection for cold-water pressure systems. The fitting suits installers who need a removable joint without threading or gluing. It is not intended for hot-water lines above 113 degrees F or for applications requiring a factory-supplied seal.

Tool-Free Installation With Seal Responsibility

The compression design allows the coupling to slide onto prepared pipe ends and tighten by hand or with a strap wrench. No primer, cement, or heat tools are required, which speeds up repairs and modifications. The supplier notes that a seal is not included, so the installer must source a compatible gasket separately. Forgetting this step is the most common cause of leaks on first pressurisation.

Verify Pipe Schedule And Temperature Range

Confirm that the existing pipe is Schedule 40 with a 2-1/2 inch nominal size before ordering. The coupling is rated for service temperatures between 32 and 113 degrees F, so it must not be used in systems that exceed this range. The overall length measures 7 35/64 inches, which determines the cut-out length needed in the line. Check local code for compression-fitting acceptance in your application.