We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber polyimide film tape roll 4in wide

Value Brand

Value Brand 15C594 Polyimide Amber Film Tape 4in x 5yd

SKU CH-FFYT-FHYMH

Polyimide film tape with silicone adhesive withstands temperatures from minus 40 to 500 degrees Fahrenheit on a four-inch by five-yard roll

  • TypePackaging and Shipping Accessories
  • ColorAmber
  • Withstands -40 °F to 500 °F for extreme environments
  • Polyimide backing delivers 30 lb-in tensile strength
  • Silicone adhesive provides 25 oz/in bonding power
  • Thin 2.5 mil profile conforms to irregular surfaces
  • Continuous 5-yard roll ensures ample supply

Polyimide Amber Film Tape 4in x 5yd

This polyimide film tape measures four inches wide by five yards long with a 2.5 mil thickness. It uses a single-sided silicone adhesive on an amber backing. The roll is new and rated for continuous temperatures from minus forty to five hundred degrees Fahrenheit.

Who this suits and who should look elsewhere

Electronics assemblers needing high-temperature masking for solder waves or conformal coating will value the 30 lb-in tensile strength and 25 oz/in adhesion. Buyers who want a lower-cost general-purpose masking tape or a wider roll for large-panel work should look elsewhere.

Temperature rating decides fit

The five hundred degree Fahrenheit maximum performance temperature is the single specification that determines whether this tape survives your process. Verify your peak oven or wave-solder temperature against this limit before ordering.

Highlights

  • Withstands -40 °F to 500 °F for extreme environments
  • Polyimide backing delivers 30 lb-in tensile strength
  • Silicone adhesive provides 25 oz/in bonding power
  • Thin 2.5 mil profile conforms to irregular surfaces
  • Continuous 5-yard roll ensures ample supply

Specifications

TypePackaging and Shipping Accessories
BrandTAPECASE
ColorAmber

Questions about this item

What width roll and backing thickness do I need to fit a 4 in. polyimide tape application?

The roll is 4 in. wide with a 2.5 mil polyimide backing, so it matches that exact width and thin-profile requirement.

How do I apply the silicone adhesive side correctly, and what surface prep step is often missed?

Clean the surface to remove oils, then press the single adhesive side firmly; the step often missed is allowing the silicone bond to cure at room temperature before heating.

When will the amber polyimide film need replacement under continuous high-heat use?

Rated from -40 °F to 500 °F with 30 lb-in tensile strength, it should last until the silicone adhesive degrades or the film shows discoloration beyond the amber hue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.