Value Brand
Value Brand 12U662 Analog Panel Thermometer 30-300F 4.5in Dial 10ft Cable
Analog panel thermometer reads 30 to 300 °F on a 4.5 in dial with a 10 ft cable
- TypeEnvironmental & Mechanical
- Wide 30 to 300°F range covers many applications
- 5 inch dial gives clear easy reading
- 10 foot cable allows flexible panel placement
- Aluminium housing with glass lens resists tough environments
- Includes NIST-traceable certificate for documented accuracy
Purpose & Audience
The Value Brand 12U662 is an analog panel thermometer built for monitoring temperatures from 30 to 300 degrees Fahrenheit. It suits technicians and operators who need a direct-reading instrument on industrial equipment or process piping.
Sustained Operation
The aluminium housing and glass lens protect the mechanism during continuous exposure to the full 30 to 300 degree range. The 10 ft capillary cable separates the 4.5 in dial from the 1/2 in MNPT sensing bulb, allowing the indicator to remain readable while the probe stays in the process stream.
Installation Notes
Mount the probe via the 1/2 in MNPT fitting and route the 10 ft cable to the panel cut-out for the 4.5 in dial. Ensure the capillary is not kinked or crushed during routing, as damage to the tube will cause reading errors. The unit includes a NIST-traceable certificate, so no field calibration is required before use. Buyers who need a digital output or programmable alarms should select a different instrument type.
Highlights
- Wide 30 to 300°F range covers many applications
- 5 inch dial gives clear easy reading
- 10 foot cable allows flexible panel placement
- Aluminium housing with glass lens resists tough environments
- Includes NIST-traceable certificate for documented accuracy
Specifications
| Brand | Zoro Select |
|---|---|
| Type | Environmental & Mechanical |
Questions about this item
Does the 4.5 in dial thermometer generate any noise or heat when running all day?
The analog panel thermometer operates without power, so it produces no noise or heat during continuous use.
What mounting hardware must I already have to install the 1/2 in MNPT connection?
You need a matching 1/2 in FNPT port or fitting on your panel or pipe to thread the thermometer stem into place.
Will the 10 ft cable and aluminium housing work with older steel pipe systems?
The aluminium housing and 10 ft capillary cable connect to standard 1/2 in NPT threads found on legacy steel piping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Keson MP301 Measuring Wheel Orange Tubular Steel Frame Metal Spoked Wheel 999Ft
Bazarc Auto Lock Inspection Loop Amber/Blue measurement tool
- Amber/Blue



