We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red LCD digital panel meter 24x72 mm DIN cutout screw terminals

Value Brand

Value Brand 12G525 Digital Panel Meter 4 to 20mA DC

SKU CH-5Z86-XDAJR

Measures 4 to 20mA DC with ±0.2% accuracy on a red LCD showing 0 to 100%, fits a standard 1/648 DIN cutout and runs on 85 to 250V AC

  • TypeElectronic
  • Accurate readings with ±0.2% precision
  • Clear 3-1/2 digit red LCD display
  • Wide 85-250V AC power compatibility
  • Standard DIN 24x72 panel cutout fit
  • Simple screw terminal wiring connections

Purpose & audience

The ZORO SELECT 12G525 is a digital panel meter built for process monitoring of 4 to 20mA DC signals. It suits technicians and engineers who need a clear percentage readout on control panels or test benches.

Installation checks

Verify that your panel has the standard 3/648 DIN cutout and that the supply voltage falls between 85 and 250V AC. The meter uses screw terminals for wiring and requires no separate excitation source for the input loop.

Sustained-load behaviour

Accuracy holds at +/- .2 percent of reading plus one count across the full 0 to 100 percent display span. The red LCD maintains visibility during continuous operation without drift from short-term warm-up effects.

Highlights

  • Accurate readings with ±0.2% precision
  • Clear 3-1/2 digit red LCD display
  • Wide 85-250V AC power compatibility
  • Standard DIN 24x72 panel cutout fit
  • Simple screw terminal wiring connections

Specifications

BrandZORO SELECT
TypeElectronic

Questions about this item

What comes in the box and what do I need to buy separately?

The meter ships with printed instructions and screw-terminal connectors for wiring. A standard 3/648 DIN cutout in your panel and an 85-250 V AC supply are required but not included.

How do I choose between the available versions or capacities?

This model is a single 4-20 mA DC process meter with a fixed 0-100 % display span and 3-1/2-digit red LCD, so there are no alternate ranges or capacities to select.

What does the ±0.2 % accuracy figure mean once the meter is installed?

The reading will stay within ±0.2 % of the measured value plus one count across the full 4-20 mA input range when powered from 85-250 V AC.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.