We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six-foot galvanized steel pipe nipple threaded both ends 1 inch MNPT Sch 40

Value Brand

Value Brand 1" MNPT x 6 ft. TBE Carbon Steel Pipe Sch 40

SKU CH-ZB1C-J9G0S

Threaded carbon-steel pipe nipple, Schedule 40, rated 1315 psi at 650 °F

  • Galvanized carbon steel resists corrosion in demanding environments
  • Schedule 40 wall thickness of 0.133 in. provides structural strength
  • Threaded MNPT both ends enable direct connection to fittings
  • Rated to 1315 psi at 650 °F for high-pressure service
  • Meets ASTM A-53, ASTM A-733 and WWN 351 standards

1" Schedule 40 Carbon Steel Pipe Nipple

This 6 ft threaded nipple is made from galvanized carbon steel with electric resistance weld construction. It meets ASTM A-53 and ASTM A-733 standards for pressure piping applications. The pipe features a nominal 1 inch size with male NPT threads on both ends. It is suitable for plumbing, hydraulic, and industrial fluid transfer systems.

Galvanized Steel with Threaded Ends

The galvanized coating provides corrosion resistance for water, air, and oil lines in typical service conditions. Male NPT threads on both ends allow direct connection to female fittings without additional adapters. The welded seam is electric resistance welded for consistent wall thickness. Metal detectable construction aids pipeline location and inspection.

1315 psi Maximum Working Pressure

This Schedule 40 nipple is rated for 1315 psi at 650 degrees Fahrenheit. The inside diameter measures 1.049 inches with a 0.133 inch wall thickness. Buyers needing higher pressure ratings or different temperature limits must select a heavier schedule or alternative material. The nominal 1 inch size and 6 foot length are fixed dimensions for this specific part.

Highlights

  • Galvanized carbon steel resists corrosion in demanding environments
  • Schedule 40 wall thickness of 0.133 in. provides structural strength
  • Threaded MNPT both ends enable direct connection to fittings
  • Rated to 1315 psi at 650 °F for high-pressure service
  • Meets ASTM A-53, ASTM A-733 and WWN 351 standards

Specifications

BrandZORO SELECT

Questions about this item

What pressure does the 1" MNPT Schedule 40 pipe handle at 650°F?

The galvanized carbon steel nipple is rated for a maximum of 1315 psi at 650 degrees Fahrenheit.

What are the exact outside diameter and wall thickness for this 1-inch nominal pipe?

The outside diameter measures 1.315 inches and the wall thickness is 0.133 inches, giving an inside diameter of 1.049 inches.

How do I install this 6-foot TBE nipple without damaging the threads?

Apply pipe thread sealant to the male NPT threads, hand-tighten into the fitting, then finish with a wrench — do not over-tighten past the point of resistance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.