We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short galvanized steel pipe nipple with threaded ends

Value Brand

Value Brand 1" MNPT x 2" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-K5CJ-XPX08

Galvanized steel pipe nipple with 1 inch MNPT threads connects Schedule 40 piping for air, gas, or potable water up to 300 psi

  • Resists corrosion with galvanized coating
  • Handles 300 psi at 150°F for air, gases, and potable water
  • Schedule 40 steel construction rated for 150 psi steam at 350°F
  • Electric resistance welded for reliable joints
  • 1" nominal size with 2" overall length for standard fittings

Galvanized Steel Pipe Nipple 1 Inch

This new galvanized steel pipe nipple connects threaded pipe sections in air, gas, and potable water systems. The Schedule 40 fitting uses electric resistance welded construction for reliable service in residential and commercial plumbing installations.

Male NPT By Threaded Both Ends

The single specification that decides fit is the 1 inch nominal pipe size with male NPT threads on both ends and a 2 inch overall length. Verify your system requires this exact thread profile and length before ordering.

Pressure Rated For Standard Service

Rated for 300 psi maximum operating pressure at 150 degrees F and 150 psi steam pressure at 350 degrees F. The galvanized coating provides corrosion resistance for typical indoor plumbing environments.

Highlights

  • Resists corrosion with galvanized coating
  • Handles 300 psi at 150°F for air, gases, and potable water
  • Schedule 40 steel construction rated for 150 psi steam at 350°F
  • Electric resistance welded for reliable joints
  • 1" nominal size with 2" overall length for standard fittings

Specifications

BrandZORO SELECT

Questions about this item

What does the 1 inch nominal size mean when I thread this nipple into my pipework?

The 1 inch nominal size matches Schedule 40 pipe threads, giving a 1 5/16 inch outside diameter that seals against standard 1 inch NPT fittings.

How do the 300 psi at 150 °F and 150 psi at 350 °F ratings limit what I can run through it?

The galvanized steel nipple handles air, gases or potable water up to 300 psi at 150 °F, but steam service is capped at 150 psi at 350 °F.

Will the 2 inch overall length and welded construction fit between my existing fittings?

The nipple measures 2 inches overall with electric resistance welded seams, so it threads into 1 inch MNPT ports on both ends without additional couplings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.