We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel tee pipe fitting with three threaded female ports

Value Brand

Value Brand 1 in Black Forged Steel Tee Class 3000

SKU CH-Q4EP-C3WJG

A 1-inch black forged steel tee rated Class 3000 with FNPT connections for high-pressure piping systems

  • Rated for 3000 psi at 72°F for high-pressure systems
  • Class 3000 forged steel construction withstands demanding conditions
  • 1-inch FNPT connections fit standard NPT piping
  • Meets ANSI B1.20.1 and ASME B16.11 standards
  • ASTM A105 material specification ensures reliable composition

Black Forged Steel Tee 1 in FNPT

This black forged steel tee provides a threaded branch connection for piping systems. It meets ANSI B 1.20.1, ASME B 16.11, SA105 and ASTM A105 standards. The fitting is rated for 3000 psi at 72 Degrees F. It suits industrial fluid handling applications.

For Class 3000 threaded piping systems

Installers working with Class 3000 forged steel piping will find this tee matches the required pressure class and material specification. The FNPT connection threads directly onto male NPT pipe ends. Builders needing socket weld, butt weld or flanged connections cannot use this fitting. It is also unsuitable for systems exceeding the 3000 psi rating.

1 in FNPT connection size

The pipe size is 1 in and the connection type is FNPT. This single specification determines whether the tee fits the existing pipework. Verify the pipe diameter and thread standard before ordering.

Highlights

  • Rated for 3000 psi at 72°F for high-pressure systems
  • Class 3000 forged steel construction withstands demanding conditions
  • 1-inch FNPT connections fit standard NPT piping
  • Meets ANSI B1.20.1 and ASME B16.11 standards
  • ASTM A105 material specification ensures reliable composition

Specifications

BrandZORO SELECT

Questions about this item

How do I install the 1 in FNPT forged steel tee without damaging the threads?

Apply PTFE tape or pipe dope to the male threads only, then hand-tighten before using a wrench for one to two additional turns; over-torquing the female NPT ports can crack the forged steel body.

What maintenance or replacement will the Class 3000 tee need over time?

Inspect the FNPT joints annually for corrosion or seepage; replace the tee if thread galling, visible cracks, or pressure loss appears, as the forged steel body itself has no serviceable internal parts.

At what pressure limit does the 3000 psi rating at 72 °F become the governing constraint?

The 3000 psi rating applies at 72 °F; above that temperature the allowable working pressure drops per ASME B16.11, so sustained high-temperature service will hit the derated limit first.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.