We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 45 degree elbow with FNPT threads

Value Brand

Value Brand 1" FNPT Galvanized 45 Degree Elbow coupling

SKU CH-9EQ9-X1DBY

A galvanized malleable iron elbow with FNPT threads for 1 inch pipe at 45 degrees, rated 300 psi WOG and listed to NSF-61 and UL standards

  • Galvanized malleable iron resists corrosion for long service life
  • 45-degree FNPT elbow redirects flow in tight piping layouts
  • Rated 300 psi at 150 °F for demanding water, oil or gas lines
  • Meets ASME B16.3, B16.4, ASTM A197, A47, FM, NSF-61 and UL standards
  • California Proposition 65 warning applies — contains listed chemicals

1" FNPT 45° Galvanized Elbow

This 1-inch female NPT galvanized malleable iron elbow changes pipe direction by 45 degrees. It is built to Class 150 specifications and rated for 300 psi at 150 degrees Fahrenheit WOG. The fitting meets ASME B16.3 and B16.4 standards and carries FM, UL, NSF-61 and AB1953 approvals.

Suits potable water and steam lines

This fitting suits installers joining two 1-inch FNPT pipes in water, oil, gas or saturated steam service up to 150 psi steam pressure. It is not for systems requiring stainless steel construction, different thread types, larger diameters or pressure ratings above Class 150.

Class 150 300 psi WOG rating

The decisive specification is the Class 150 rating with a maximum working pressure of 300 psi at 150 degrees Fahrenheit WOG. This single figure determines whether the elbow can handle the pressure and temperature demands of your specific piping system.

Highlights

  • Galvanized malleable iron resists corrosion for long service life
  • 45-degree FNPT elbow redirects flow in tight piping layouts
  • Rated 300 psi at 150 °F for demanding water, oil or gas lines
  • Meets ASME B16.3, B16.4, ASTM A197, A47, FM, NSF-61 and UL standards
  • California Proposition 65 warning applies — contains listed chemicals

Specifications

BrandZORO SELECT

Questions about this item

What pipe size and thread standard does the 1" FNPT elbow use?

It fits 1 inch pipe with FNPT threads built to ASME B 16.3 and B 16.4 specifications

What material and pressure rating must the mounting system handle?

Galvanized malleable iron rated for 300 psi at 150 degrees F WOG and 150 psi saturated steam

How do you seal the tapered threads without cracking the fitting?

Apply PTFE tape or pipe dope on the male threads only, hand-tighten then turn one to two full turns with a wrench — over-torquing splits the iron

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.