We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short galvanized steel pipe nipple with threaded ends

Value Brand

Value Brand 1-1/4" MNPT x 6" Galvanized Steel Pipe Nipple Sch 40

SKU CH-QDM4-NMX2G

Galvanized steel pipe nipple with 1-1/4 inch MNPT threads on both ends, Schedule 40 wall, six-inch overall length, rated for 500 psi working pressure

  • Galvanized coating resists corrosion for longer service life
  • Schedule 40 wall handles up to 500 psi working pressure
  • Threaded both ends with 1-1/4" MNPT for quick assembly
  • Electric resistance weld construction ensures consistent joint strength
  • California Proposition 65 notice lists cancer and reproductive-harm chemicals

1-1/4" Galvanized Steel Pipe Nipple

This 6-inch Schedule 40 nipple is manufactured from welded galvanized steel with male NPT threads on both ends. It is designed for joining two female-threaded fittings or pipes in plumbing and piping systems. The electric resistance weld construction provides a consistent seam for standard pressure applications. It arrives in new condition and is compliant with California Proposition 65 labeling requirements.

Schedule 40 Rating and 500 psi Maximum Pressure

The pipe nipple carries a Schedule 40 wall thickness and is rated for a maximum working pressure of 500 psi. This pressure rating is the primary specification that determines suitability for a given water, air, or oil line. The galvanized coating adds corrosion resistance for typical indoor and outdoor installations. Verify that your system design does not exceed this pressure limit before installation.

Suits Installers Needing a Standard 6-Inch

This component fits plumbers and maintenance crews requiring a 1-1/4 inch nominal diameter nipple with MNPT threads on both ends. It is not intended for systems requiring a higher pressure class, a different pipe schedule, or a non-threaded connection method such as grooved or flanged ends. Buyers who need a longer or shorter overall length, or a different nominal pipe size, should select an alternative fitting.

Highlights

  • Galvanized coating resists corrosion for longer service life
  • Schedule 40 wall handles up to 500 psi working pressure
  • Threaded both ends with 1-1/4" MNPT for quick assembly
  • Electric resistance weld construction ensures consistent joint strength
  • California Proposition 65 notice lists cancer and reproductive-harm chemicals

Specifications

BrandZORO SELECT

Questions about this item

What does the 1-1/4 inch nominal size mean when the nipple is installed?

The 1-1/4 inch nominal size matches standard 1-1/4 inch NPT threads so it screws directly into matching female fittings without adapters.

How does the MNPT x MNPT thread type limit the maximum pressure?

The tapered male threads on both ends seal against female NPT ports and the Schedule 40 wall supports the rated 500 psi working pressure.

What clearance is needed to fit the 6 inch overall length?

The nipple measures 6 inches from thread end to thread end so allow at least that much straight run plus room for a pipe wrench on the hex.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.