We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White plastic lavatory trap 1-1/4 inch diameter with slip connection and nut washer included

Value Brand

Value Brand 1-1/4 in White Plastic Lavatory Trap

SKU CH-VAP4-VB16V

White plastic lavatory trap extension connects misaligned pipes with slip fittings and includes nut and washer

  • ColorWhite
  • Fits 1-1/4 in drain connections
  • White plastic suits bathroom aesthetics
  • Slip connection enables quick installation
  • Includes nut and washer for sealing
  • Plastic construction resists corrosion

Lavatory Trap for Misaligned Pipes

This white plastic lavatory trap connects 1-1/4 inch drain lines where pipes do not line up perfectly. It is made from polypropylene and includes a nut and washer for a secure slip connection. The fitting suits residential bathroom sinks and similar low-pressure drainage applications.

Chemical Safety Notice

The product carries a California Proposition 65 warning because it contains a chemical known to the State of California to cause cancer. The same warning also notes a chemical known to cause birth defects or other reproductive harm. No thermal, noise or power-draw data applies to this passive plumbing component.

8-Inch Overall Length

The trap body measures 8 inches in overall length with a 1-1/4 inch outside diameter. This single dimension determines whether the fitting will span the gap between your sink tailpiece and the wall drain. Buyers needing a shorter or longer reach must choose a different part.

Highlights

  • Fits 1-1/4 in drain connections
  • White plastic suits bathroom aesthetics
  • Slip connection enables quick installation
  • Includes nut and washer for sealing
  • Plastic construction resists corrosion

Specifications

ColorWhite
BrandZORO SELECT

Questions about this item

How do I install the 1-1/4 in plastic lavatory trap and which step is commonly missed?

Slip the included nut and washer onto the pipe, align the trap, then tighten the slip connection by hand plus a quarter turn; the step often missed is seating the washer fully before tightening.

What maintenance or replacement will the 1-1/4 in plastic lavatory trap need later?

Periodically check the slip nut and washer for leaks; replace the washer if it hardens or the nut if threads strip, otherwise the polypropylene body requires no routine service.

What limit appears first on the 1-1/4 in plastic lavatory trap under sustained use?

The slip-joint washer will degrade before the polypropylene body, so leak-free sealing is the first limitation under continuous drainage and temperature cycling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.