We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel pipe nipple, threaded both ends, 1-1/2 inch nominal size, two inches long

Value Brand

Value Brand 1-1/2" x 2" Black Pipe Nipple Sch 80

SKU CH-DSTS-M3ANK

Black steel Schedule 80 nipple with threaded MNPT ends rated for 2000 psi at 150 °F and 300 psi steam at 550 °F

  • Schedule 80 wall handles 2000 psi at 150 °F
  • Seamless black steel meets ASTM A106 and A733
  • Threaded both ends for direct MNPT connections
  • 1-1/2 in nominal size with 3/16 in wall thickness
  • Rated for 300 psi steam service at 550 °F

1-1/2" Schedule 80 Black Steel Nipple

This 1-1/2 inch nominal black steel pipe nipple is built to ANSI/ASME B 1.20.1 and ASTM A106 standards. It suits plumbing and industrial systems that require a short, threaded connection rated for high pressure and steam service.

Threaded Both Ends for Direct Assembly

The nipple arrives with MNPT threads on each end, allowing it to screw straight into matching fittings without extra adapters. Installers must apply suitable thread sealant and avoid over-tightening, which can distort the 3/16 inch wall and compromise the seal.

2000 psi Rating at 150 Degrees F

The decisive figure is the 2000 psi maximum working pressure at 150 degrees F, with a 300 psi steam rating at 550 degrees F. Systems operating above these limits need a different pressure class; low-pressure water lines do not require this schedule.

Highlights

  • Schedule 80 wall handles 2000 psi at 150 °F
  • Seamless black steel meets ASTM A106 and A733
  • Threaded both ends for direct MNPT connections
  • 1-1/2 in nominal size with 3/16 in wall thickness
  • Rated for 300 psi steam service at 550 °F

Specifications

BrandZORO SELECT

Questions about this item

How can I verify the nipple is threaded correctly after installation?

Check that both ends engage smoothly with matching MNPT fittings and that the joint holds 2000 psi at 150 °F without leaks.

What comes in the package and what must I supply?

The box contains the black steel Schedule 80 nipple only; you must provide compatible MNPT fittings, thread sealant and any required valves.

Which schedule and size should I select for high-pressure steam?

Choose the Schedule 80, 1-1/2 in nominal size rated for 300 psi steam at 550 °F per ASTM A106 and A733.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.