We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short galvanized steel pipe nipple with tapered threads on one end and plain cut on the other, dull silver finish

Value Brand

Value Brand 1-1/2" MNPT x 2" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-KCY6-V5CTS

Galvanised steel pipe nipple with 1-1/2 inch MNPT and 2 inch TBE ends for Schedule 40 systems rated to 300 psi

  • Galvanised coating resists corrosion for long service life
  • Schedule 40 wall handles 300 psi at 150 °F for air, gases and potable water
  • Electric resistance weld construction ensures leak-free joints
  • 1-1/2 in nominal size with 2 in overall length fits standard piping
  • Complies with Prop 65 chemical disclosure requirements

Application & Compatibility

This galvanised steel pipe nipple is rated for air, gases and potable water in Schedule 40 systems. The 300 psi working pressure at 150 °F and 150 psi steam rating at 350 °F cover typical residential and light commercial supply lines.

Thread & Size Verification

Confirm the existing piping uses 1-1/2 inch male NPT threads and that a 2 inch overall length fits the available space. The outside diameter of 1 57/64 inches must match the female fitting or coupling being joined.

Construction & Daily Use

Electric-resistance welded steel with a galvanised coating provides corrosion resistance for long service life. The threaded ends allow direct assembly without additional flanges, and the Schedule 40 wall thickness withstands standard mechanical stresses during installation and operation.

Highlights

  • Galvanised coating resists corrosion for long service life
  • Schedule 40 wall handles 300 psi at 150 °F for air, gases and potable water
  • Electric resistance weld construction ensures leak-free joints
  • 1-1/2 in nominal size with 2 in overall length fits standard piping
  • Complies with Prop 65 chemical disclosure requirements

Specifications

BrandZORO SELECT

Questions about this item

What does the 2-inch TBE nipple include and is any sealant or tape supplied?

The nipple is a single 2-inch overall length piece of galvanised steel with 1-1/2-inch male NPT threads on one end and plain thread-both-ends finish on the other; no tape or compound is included.

Should I choose the Schedule 40 version or a different schedule for a 300 psi air line at 150 °F?

Schedule 40 matches the 300 psi @ 150 °F rating shown for this nipple; a heavier schedule would exceed the required pressure class while a lighter one would fall short.

What does the 300 psi @ 150 °F rating mean once the nipple is installed in a real piping system?

It confirms the nipple can continuously handle 300 psi air, gas or potable water at temperatures up to 150 °F without exceeding the material’s design stress.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.