Valcom, Inc
Valcom, Inc V-1030C-GY 5 W 1-way paging horn telephone accessory gray
A 5 W one-way paging horn with 225 Hz to 14 kHz response, 24 V DC input, and included I-beam clamp and mounting base
- TypeOthers
- Specifications5 Watt 1 Way Paging Horn - Gray
- 5 W RMS output for clear paging
- Frequency response 225 Hz to 14 kHz
- 24 V DC input for simple wiring
- Gray horn with I-beam clamp included
- Compact 7.4 × 10 × 10.5 in footprint
5 Watt paging horn
The Valcom V-1030C-GY is a 5 W RMS paging horn designed for one-way voice announcements in commercial and industrial environments. Its gray finish suits exposed mounting on walls or structural steel. The unit operates on 24 V DC and includes an I-beam clamp and mounting base for flexible installation.
Frequency response and output headroom
The speaker delivers a frequency response of 225 Hz to 14 kHz, covering the speech band clearly for paging and alert tones. At 5 W RMS it provides adequate volume for moderate indoor spaces or covered outdoor areas. Larger open yards or high-noise factories will exceed its output capability.
Upgrade from lower-powered horns
This model replaces older 2 W or 3 W paging horns when broader coverage or higher intelligibility is required. The jump is worthwhile when existing horns cannot cut through background noise or when mounting points demand the included I-beam clamp. It is not suited for installations needing music-quality fidelity or stereo playback.
Highlights
- 5 W RMS output for clear paging
- Frequency response 225 Hz to 14 kHz
- 24 V DC input for simple wiring
- Gray horn with I-beam clamp included
- Compact 7.4 × 10 × 10.5 in footprint
Specifications
| Brand | Valcom |
|---|---|
| Model | V-1030C-GY |
| Type | Others |
| Specifications | 5 Watt 1 Way Paging Horn - Gray |
| Shipping weight | 2.72 kg |
| Package size | 406 × 305 × 254 mm |
Questions about this item
Will the V-1030C-GY paging horn connect to my existing 24 V DC paging amplifier without extra adapters?
The unit operates on 24 V DC input, matching standard Valcom paging amplifier outputs. Connect the two-wire feed from the amplifier to the horn's screw terminals; no separate power supply is required.
How can I verify the V-1030C-GY is reproducing audio correctly after mounting?
Apply a page and listen for clear speech between 225 Hz and 14 kHz at the rated 5 W RMS output. The gray horn should project evenly without distortion when driven by a compatible 24 V DC source.
Does the V-1030C-GY box include mounting hardware or must I buy brackets separately?
The package contains the V-1030C speaker system, an I-beam clamp and a mounting base. All three items are in the box, so no additional brackets are needed for typical beam or wall installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



