We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White vacuum pump and 20 dark grey filament storage bags with desiccant

vacloong P08-B+203D Filament Vacuum Kit 20 Bags 1.75mm

SKU CH-XPHQ-DHCXF

Vacuum-seals 20 light-proof bags with a 10 L/min pump reaching -60 kPa to keep 1.75 mm filament dry for 72 hours

  • ColorWhite (Machine); Dark Gray (Bags)
  • MaterialABS (Machine); PA+PE (Bags)
  • Diameter1.75
  • Vacuum ready in seconds with 10 L/min suction and -60 kPa pressure
  • Smart current protection works with power banks, car chargers, USB-C and USB-A
  • Lightproof PA+PE bags block UV while printed side shows filament details
  • Twenty 32 × 34 cm bags fit 0.5–1 kg spools of 1.75, 2.85 or 3 mm filament
  • Patented one-way valve holds vacuum for 72 hours and desiccant keeps material dry

Vacuum Kit for 1.75 mm Filament

This kit pairs a compact electric pump with twenty lightproof storage bags designed for 1.75 mm spools. It targets hobbyists and small workshops that need to keep PLA, ABS, PETG, TPU and similar materials dry and ready to print. The pump runs from common USB power sources for bench or field use.

Check Power Source and Spool Size

Verify you have a USB-A or USB-C charger, power bank or car adapter to run the pump via its 1.2 m cord. Confirm your spools fit within the 32 cm by 34 cm bag dimensions and weigh between 0.5 kg and 1 kg. The bags also accept 2.85 mm and 3 mm filament if you use mixed diameters.

Pump Build and Daily Sealing Routine

The white ABS pump housing contains a one-way valve rated to hold minus 60 kPa for 72 hours without leakage. Each dark grey PA+PE bag includes a desiccant sachet and a printed label panel for material, colour and date. Supplied sealing clips speed up the bag closing process during repeated filament changes.

Highlights

  • Vacuum ready in seconds with 10 L/min suction and -60 kPa pressure
  • Smart current protection works with power banks, car chargers, USB-C and USB-A
  • Lightproof PA+PE bags block UV while printed side shows filament details
  • Twenty 32 × 34 cm bags fit 0.5–1 kg spools of 1.75, 2.85 or 3 mm filament
  • Patented one-way valve holds vacuum for 72 hours and desiccant keeps material dry

Specifications

Brandvacloong
ModelP08-B+203D
ColorWhite (Machine); Dark Gray (Bags)
MaterialABS (Machine); PA+PE (Bags)
Diameter1.75

Questions about this item

What comes in the Vacloong P08-B+203D kit and do I need to buy anything extra?

The kit includes a white ABS vacuum pump with a 1.2 m USB power cord, 20 dark-grey PA+PE storage bags measuring 32 × 34 cm, sealing clips and a desiccant packet inside each bag. No extra items are required.

How do I decide which bag size or capacity to pick for my spools?

All 20 bags are the same 12.6" × 13.4" size and fit 0.5–1 kg spools of 1.75 mm, 2.85 mm or 3 mm filament, so there is no capacity choice to make.

What does the -60 kPa vacuum rating mean once the bag is sealed on my printer shelf?

The pump pulls the bag down to -60 kPa in seconds and the one-way valve holds that level for 72 hours, keeping PLA, ABS, PETG, TPU and other materials dry and oxidation-free.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.