We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical xenon projector lamp with metal end caps and ceramic insulator, new condition

Ushio

Ushio DXL-30BAF/LU 3000W 1900 Hour Xenon L Series Lamp for DP-3000

SKU CH-1FQ9-SJWGA

3000W xenon lamp rated for 1900 hours in Barco DP-3000 and compatible digital cinema projectors

  • TypeProject Lamp
  • Weight6.0000
  • 3000W xenon lamp delivers high brightness for digital cinema projection
  • 1900-hour rated life supports extended operation between replacements
  • Compatible with Barco DP-3000, DP-2000, DP-1500 and Galaxy 4K series projectors
  • Operates at 26V and 115A within a 21003000W power range for proper electrical fit
  • 2-hour on/off cycles delay flicker onset by up to 30% versus 11-hour continuous operation

3000W Xenon lamp for Barco cinema projectors

This Ushio DXL-30BAF/LU lamp delivers 3000W output with a 1900 hour rated life. It is built for Barco digital cinema projectors including the DP-3000, DP-2000, DP-1500, DP4K and Galaxy 4K series. The lamp operates at 26V and 115A within a 21003000W power range. It carries the Barco part number R9801863 and Ushio part number 5003296.

Replaces older Xenon lamps in supported Barco models

The lamp serves as a direct replacement for expired Xenon lamps in the listed Barco projectors. The upgrade is worth it when the existing lamp has reached or exceeded its rated hours and brightness has dropped below cinema specification. Operational research shows that cycling the lamp off for 10 minutes every 2 hours can delay flicker onset by up to 30 percent compared with 11 hour continuous runs.

Check projector model and power supply compatibility

Verify that your projector appears in the supported list before ordering. Confirm the installation can supply 26V at 115A and handles the 21003000W operating range. The lamp weighs 6.0000 units and fits the DP-3000-3kW-LAMP housing used in Prometheus II, DP2K and DP4K cabinets.

Highlights

  • 3000W xenon lamp delivers high brightness for digital cinema projection
  • 1900-hour rated life supports extended operation between replacements
  • Compatible with Barco DP-3000, DP-2000, DP-1500 and Galaxy 4K series projectors
  • Operates at 26V and 115A within a 21003000W power range for proper electrical fit
  • 2-hour on/off cycles delay flicker onset by up to 30% versus 11-hour continuous operation

Specifications

BrandJaspertronics
ModelDP-3000-3kW-LAMP
Part NumberDP-3000-3kW-LAMP
TypeProject Lamp
Weight6.0000

Questions about this item

Which projectors accept the Ushio DXL-30BAF/LU 3000W xenon lamp?

It is approved for Barco Prometheus II, DP-1500, DP-2000, DP-3000, DP2K-15C, DP2K-19B, DP2K-20C, DP2K-20Cx, DP2K-23B, DP2K-32B, DP2K-P, DP4K-19B, DP4K-23B, DP4K-P, Galaxy 4K-12, Galaxy 4K-12 HFR, Galaxy 4K-23, Galaxy 4K-23 HFR, Galaxy 4K-32 and Galaxy 4K-32 HFR.

What electrical values must match for the DP-3000 installation?

The lamp is rated at 26V and 115A with a 21003000W operating power range; verify the projector’s power supply delivers those figures before fitting.

How long is the rated service life before replacement?

The lamp is rated for 1900 hours of operation; running cycles of two hours on and ten minutes off can delay flicker onset by about 30 percent compared with continuous 11-hour runs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.