We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 3 ft GFCI extension cord with lighted three-prong socket and inline GFCI module

usbroway

usbroway 3 ft GFCI extension cord 12/3 SJTW 15 A 125 V 1875 W yellow

SKU CH-B3PE-2PS6A

A three-foot inline GFCI extension cord rated 15 A at 125 V with lighted sockets and a flexible vinyl jacket rated from minus 40 °F to 140 °F

  • Connector Typetype
  • Built-in light shows power status at a glance
  • Flexible vinyl jacket resists moisture, abrasion and sunlight
  • Reinforced blades prevent prongs from bending or breaking
  • UL certified 12 AWG inline GFCI rated 15 A 125 V 1875 W
  • Operates reliably from -40 °F to +140 °F

Product identity

This UL certified 12 gauge inline GFCI extension cord measures three feet and delivers 15 amps at 125 volts for 1875 watts. It suits anyone needing a short, safety rated power lead for outdoor tools or job site equipment. The lighted socket shows power status at a glance. The heavy duty yellow jacket resists moisture, abrasion and sunlight.

Thermals noise and power

The vinyl covering remains flexible from minus 40 to plus 140 degrees Fahrenheit, so the cord handles cold mornings and hot afternoons without stiffening. GFCI protection interrupts ground faults quickly, limiting heat build up during a fault. No moving parts means silent operation. The 12 AWG conductors carry the rated 1875 watt load with minimal voltage drop.

Deciding specification

The inline GFCI breaker is the feature that determines suitability; it provides personnel protection required on construction sites and damp locations. Buyers who need a longer reach or multiple outlets must choose a different cord. The three foot pigtail length limits placement to positions close to the supply receptacle.

Highlights

  • Built-in light shows power status at a glance
  • Flexible vinyl jacket resists moisture, abrasion and sunlight
  • Reinforced blades prevent prongs from bending or breaking
  • UL certified 12 AWG inline GFCI rated 15 A 125 V 1875 W
  • Operates reliably from -40 °F to +140 °F

Specifications

Connector Typetype

Questions about this item

How do I install the 12/3 SJTW GFCI extension cord and what step do people often miss?

Plug the three-prong grounded plug into a 125 V outlet, then press the GFCI reset button until it clicks; the built-in light confirms power is on. Many users forget to test the GFCI with the test button before connecting equipment.

What maintenance or replacement will the inline GFCI module need later?

The UL-certified GFCI should be tested monthly using its test and reset buttons; if the device trips and will not reset, or the light stays off when powered, replace the entire 3 ft cord assembly.

What limit appears first during sustained 15 A use on this 12 AWG cord?

The 1875 W rating at 125 V is reached at 15 A, so the thermal limit of the 12/3 SJTW cable and the GFCI’s 15 A trip point both activate at the same load ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.