We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB A to B cable with over-molded connectors, three feet long

USBGear

USBGear USB 3.2 Gen 1 Cable A Male to B Male 3ft

SKU CH-1HQ6-48M03

Connects USB 3.0 printers, scanners or hubs to a PC at up to 5Gbps with over-molded A-to-B connectors

  • Connector TypeUSB A to USB B
  • ColorBlack
  • Cable Length4 ft.
  • Length3 ft.
  • Transfers data at up to 5Gbps under USB 3.2 Gen 1
  • Connects USB 3.0 printers, scanners or hubs via A-to-B plugs
  • Over-molded connectors strengthen the joint for longer life
  • Rated for 80-degree, 30V environments for stable operation
  • Works with USB 2.0 and 1.1 devices without extra setup

USB 3.2 Gen 1 A-to-B cable

This three-foot cable links USB 3.0 printers, scanners or hubs to a compatible PC or laptop. It carries a USB 3.2 Gen 1 Type-A plug on one end and a Type-B plug on the other. The moulded connector shells reinforce the joint between cable and plug. No driver installation is required for operation.

Up to 5 Gbps with USB 2.0 fallback

The cable supports the full 5 Gbps signalling rate defined by the USB 3.2 Gen 1 specification. When connected to older ports it falls back to USB 2.0 or 1.1 speeds automatically. Bandwidth is sufficient for typical document printing, scanning and hub traffic. Very large bulk transfers will saturate the link and run at the 5 Gbps ceiling.

Rated for 30 V and 80 °C operating environment

The assembly is qualified for a 30 V working voltage and an 80 °C ambient temperature range. Over-moulded connectors reduce strain during repeated insertion cycles. Power draw follows the USB 3.2 Gen 1 bus-power limits for the attached device. The cable adds no active cooling or noise of its own.

Highlights

  • Transfers data at up to 5Gbps under USB 3.2 Gen 1
  • Connects USB 3.0 printers, scanners or hubs via A-to-B plugs
  • Over-molded connectors strengthen the joint for longer life
  • Rated for 80-degree, 30V environments for stable operation
  • Works with USB 2.0 and 1.1 devices without extra setup

Specifications

ModelUSB3.0-ABM-3FT
Connector TypeUSB A to USB B
ColorBlack
Cable Length4 ft.
Length3 ft.

Questions about this item

Will this USB 3.2 Gen 1 A-to-B cable run at full speed with my older USB 2.0 printer?

The cable is backward compatible with USB 2.0 and 1.1 devices, so it will work but the transfer rate will be limited to the printer's USB 2.0 capability.

How can I confirm the cable is delivering 5 Gbps after I plug it in?

Connect a USB 3.0 device such as a scanner or hub, then check the operating system's device manager or system report to verify the link is enumerated as USB 3.0 or SuperSpeed.

Does the package include any adapters or driver discs, or is it just the cable?

The box contains only the 3 ft USB A Male to B Male cable with over-molded connectors; no adapters, driver discs or additional accessories are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.