USBGear
USBGear MRFS-0304B USB 2.0 Extension Cable A Male Right Angle to A Female 3ft Black
A right-angled USB 2.0 extension cable adds 3 ft of reach for tight spaces behind desks or printers
- Connector TypeUSB A to USB A
- ColorBlack
- Length3ft
- Right-angle plug fits tight spaces behind desks
- USB 2.0 certified cable supports high-speed data
- 3 ft length adds reach without clutter
- 28 AWG conductors ensure reliable signal quality
- RoHS compliant and UL listed for safety
Right-angle clearance for tight spaces
The USBGear MRFS-0304B is a 3 ft USB 2.0 extension cable with a right-angle Type-A male plug and a straight Type-A female port. Its low-profile design lets the cable run parallel to the host device, reducing strain where rear-panel ports sit close to a wall or desk edge. The assembly uses 28/28 AWG wiring and materials certified to USB-IF TID 60000289.
For cramped rear I/O — not for high-speed
Buyers who need to connect a printer, scanner or similar peripheral in a confined space will benefit from the right-angle connector. Users who require USB 3.0 or higher signalling rates, longer reach than three feet, or a straight male plug should select a different cable. The product is limited to USB 2.0 electrical performance.
USB 2.0 compliance verified by USB-IF TID 60000289
The cable is built from USB.org certified raw material carrying TID 60000289 and meets RoHS and UL 75 °C CM requirements (E200534). This certification confirms the materials and construction satisfy the USB 2.0 specification for high-speed operation. No other speed grade or protocol is supported.
Highlights
- Right-angle plug fits tight spaces behind desks
- USB 2.0 certified cable supports high-speed data
- 3 ft length adds reach without clutter
- 28 AWG conductors ensure reliable signal quality
- RoHS compliant and UL listed for safety
Specifications
| Brand | USBGear |
|---|---|
| Model | MRFS-0304B |
| Connector Type | USB A to USB A |
| Color | Black |
| Length | 3ft |
Questions about this item
Will the right-angle USB-A male plug fit beside other cables on a crowded motherboard header?
The low-profile right-angle USB-A male connector is designed to sit flush against the host port, leaving room for adjacent cables on tight motherboard headers or rear I/O panels.
How can I verify the extension is operating at USB 2.0 speeds after I plug it in?
Connect a USB 2.0 device through the cable and confirm the OS enumerates it as a high-speed device; the cable uses USB-IF verified materials (TID 60000289) and 28/28 AWG wiring.
Does the 3 ft box contain only the cable or are ferrite cores or adapters included?
The package supplies the 3 ft USB 2.0 extension cable with right-angle A male to straight A female connectors; no ferrite cores, adapters or extra accessories are included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


