We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White USB 2.0 A male to A female extension cable 5ft

USBGear

USBGear AA5FT-W USB 2.0 A-Male to A-Female Extension Cable 5ft White

SKU CH-C6C4-YEEF2

Extends a USB 2.0 connection by 5 ft with 480 Mbps speed, flexible jacket, and 24-gauge power wires for reliable peripheral placement

  • Connector TypeUSB A to USB A
  • ColorWhite
  • Length5ft
  • Extends USB 2.0 connections up to 16.5 feet
  • 480Mbits/sec high-speed data transfer rate supported
  • Flexible cable jacket fits tight installation spaces
  • 24-gauge power wires deliver maximum USB performance
  • Foil and braid shield reduces EMI/RFI interference

USB 2.0 A-to-A extension cable for peripheral

This five-foot white cable adds length between a host port and a USB 2.0 device such as a printer or scanner. It carries a male Type-A plug on one end and a female Type-A receptacle on the other. The flexible jacket suits tight routing behind desks or equipment racks.

Shielded construction maintains 480 Mbps over

Foil-and-braid shielding reduces EMI and RFI so the link stays at the rated 480 Mbits per second without drop-outs. Twenty-four-gauge power conductors keep voltage drop low for reliable device operation. The specification limits total bus length to 16.5 feet, so chaining multiple extensions can exceed the allowed distance.

Simple plug-in with molded strain relief

No drivers or tools are required; the connectors seat firmly and the overmoulded boots protect the solder joints from bending stress. The only common issue is exceeding the 16.5-foot total-cable limit when this extension is combined with other cables, which can cause intermittent disconnects or reduced throughput.

Highlights

  • Extends USB 2.0 connections up to 16.5 feet
  • 480Mbits/sec high-speed data transfer rate supported
  • Flexible cable jacket fits tight installation spaces
  • 24-gauge power wires deliver maximum USB performance
  • Foil and braid shield reduces EMI/RFI interference

Specifications

BrandUSBGear
ModelAA5FT-W
Connector TypeUSB A to USB A
ColorWhite
Length5ft

Questions about this item

Does the 5 ft cable add noticeable heat or power loss when a printer runs all day?

The cable uses 24 AWG power wires and foil-plus-braid shielding to meet USB 2.0 voltage-drop limits, so a 5 ft run stays within spec without extra heat.

What must my device already have for this extension to work?

Your peripheral needs a standard USB 2.0 Type-A port; the cable simply plugs between that port and the host’s Type-A socket.

Will the 480 Mbps link stay reliable if I keep an older USB 1.1 scanner on the same hub?

Yes, the extension is fully USB 2.0 compliant and backward compatible, so legacy 1.1 devices negotiate at their native speed without errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.