Usa Sealing
Usa Sealing ZUSA-VLV-74 Manual 2-Way Ball Valve Acetal 1/4 in
Manual two-way ball valve in acetal handles water up to 115 psi with a wedge handle
- Manual flow control for water systems
- One-piece acetal body resists corrosion
- 115 psi maximum operating pressure
- Straight 1/4 in port with 5/16 in connection
- Wedge handle enables quick on-off operation
Valve for water and air systems
This manual two-way ball valve controls flow in water lines and compressed-air circuits. The acetal body and acetal ball resist corrosion from moisture and common shop fluids. A straight, one-piece body keeps the flow path simple and reduces potential leak points. The wedge handle turns a quarter-turn to open or close the valve quickly.
Pressure headroom and port size
Rated for 115 psi maximum operating pressure, the valve handles typical shop compressors and low-pressure water supplies with margin to spare. The standard-port ball provides adequate flow for 1/4-inch nominal lines without excessive restriction. Steam, combustible gas and high-purity 3-A sanitary duties are outside the rated scope.
Connection limits and locking
Side ports accept 5/16-inch connections, so hose barbs or push-to-connect fittings must match that dimension. The non-locking wedge handle prevents accidental actuation but cannot be padlocked for safety lock-out procedures. Builders needing lock-out capability or larger port diameters should select a different valve model.
Highlights
- Manual flow control for water systems
- One-piece acetal body resists corrosion
- 115 psi maximum operating pressure
- Straight 1/4 in port with 5/16 in connection
- Wedge handle enables quick on-off operation
Specifications
| Brand | USA INDUSTRIALS |
|---|
Questions about this item
Will this 1/4 in ball valve thread onto the existing 5/16 in push-to-connect fittings on my older air line?
The valve uses a 5/16 in connection on each side so it matches that fitting size directly.
How can I verify the acetal body is sealing correctly at 115 psi after installation?
Pressurise the line to the 115 psi maximum operating pressure and check for leaks at both ports and the stem.
Does the package include the wedge handle or must I order it separately?
The wedge handle is fitted to the valve as supplied so no separate handle purchase is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
