We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear silicone tubing coil 3/4 inch ID 1 inch OD 10 ft length

Usa Sealing

Usa Sealing ZUSA-HT-765 FDA Silicone Tubing 3/4 in ID 1 in OD 10 ft

SKU CH-RDVB-4HWTV

FDA-compliant clear silicone tubing for beverage, dairy and water lines, 3/4 in ID by 1 in OD, 10 ft length, 40 psi at 480 °F, Shore A 70, peristaltic-pump compatible

  • Food-safe tubing for beverage and dairy lines
  • Clear silicone shows flow and resists 40 psi pressure
  • Handles 480 Degrees F for hot CIP cycles
  • Peristaltic pump compatible for precise dosing
  • Ten-foot coil cuts to custom lengths fast

FDA Silicone Tubing for Food & Beverage

This clear silicone tubing is built for beverage, dairy and water lines where cleanliness matters. It meets FDA requirements and carries a Shore A 70 hardness rating. The 10 ft length arrives ready to cut and fit.

Peristaltic Pump Ready with No Jacket

The bare silicone wall has no outer jacket, so it seats cleanly in pump rollers and fittings. It handles 40 psi working pressure without collapsing. Clear construction lets you spot blockages or colour changes instantly.

480 °F Maximum Operating Temperature

Continuous exposure up to 480 °F is supported, covering most hot-water and steam-in-place cycles. Buyers who need higher temperature ratings or longer continuous lengths will need a different specification.

Highlights

  • Food-safe tubing for beverage and dairy lines
  • Clear silicone shows flow and resists 40 psi pressure
  • Handles 480 Degrees F for hot CIP cycles
  • Peristaltic pump compatible for precise dosing
  • Ten-foot coil cuts to custom lengths fast

Specifications

BrandZORO SELECT

Questions about this item

What pressure does the 40 psi rating actually limit in use?

The 40 psi maximum operating pressure caps the internal fluid pressure the tubing can safely handle during beverage, dairy, or water transfer.

What clearance is needed for the 1 inch outside diameter?

The 1 inch outside diameter requires fittings, clamps, or routing channels sized to accept a full 1 inch OD tube.

How is the 10 foot length installed, and where do people go wrong?

Cut the 10 foot coil to length, slide over barbed fittings, and secure with clamps; the common error is skipping clamps on the 3/4 inch ID bore.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.