We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear silicone tubing coil, 10 ft length, smooth translucent finish

Usa Sealing

Usa Sealing ZUSA-HT-764 FDA Silicone Tubing 5/8 ID 3/4 OD 10 ft

SKU CH-N3FW-FKXCR

FDA-compliant clear silicone tubing for beverage, dairy and water lines, 5/8 in ID, 3/4 in OD, 10 ft length, rated to 480 °F and 40 psi

  • FDA-compliant silicone for food and beverage contact
  • Withstands 480 °F continuous operating temperature
  • Rated to 40 psi maximum working pressure
  • 10 ft length, 5/8 in ID × 3/4 in OD
  • Shore A 70 hardness suits peristaltic pump use

Food-Grade Silicone Tubing

This clear silicone tubing meets FDA requirements for beverage, dairy and water contact. It is supplied in a 10 ft length with a 5/8 in inside diameter and 3/4 in outside diameter. The material carries a Shore A 70 hardness rating for consistent flexibility.

Suitable for Peristaltic Pumps

The tubing works with peristaltic pumps and handles food, dairy and beverage transfer at up to 40 psi. It is not intended for high-pressure hydraulic systems or applications that exceed the stated pressure limit. Buyers needing reinforced or jacketed hose should look at alternative constructions.

Temperature Range and Pressure Headroom

Continuous service is rated to 480 Degrees F, giving wide headroom for hot water and steam cleaning cycles. The 40 psi maximum operating pressure covers typical gravity-feed and low-pressure pump setups. Systems running above this pressure or requiring vacuum-rated walls will need a different specification.

Highlights

  • FDA-compliant silicone for food and beverage contact
  • Withstands 480 °F continuous operating temperature
  • Rated to 40 psi maximum working pressure
  • 10 ft length, 5/8 in ID × 3/4 in OD
  • Shore A 70 hardness suits peristaltic pump use

Specifications

BrandZORO SELECT

Questions about this item

What fittings do I need to connect the 5/8 in. ID silicone tubing to my existing plumbing?

Use barbed or compression fittings sized for a 5/8 in. inside diameter and 3/4 in. outside diameter to match the tubing dimensions.

Will the tubing handle the temperature of my current 40 psi water system without degrading?

The tubing is rated for a maximum operating pressure of 40 psi and a maximum operating temperature of 480 °F, covering typical hot water applications.

How can I verify the tubing is performing correctly after installation?

Check for leaks at the connections, confirm flow is unrestricted, and ensure the clear tubing shows no kinking, discoloration, or softening during operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.