We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear silicone tube 3/8 inch inside diameter 1/2 inch outside diameter 10 foot coil

Usa Sealing

Usa Sealing ZUSA-HT-760 FDA Silicone Tubing 3/8 ID 1/2 OD 10 ft

SKU CH-9CWX-71KXF

FDA-compliant clear silicone tubing for beverage, dairy and water lines, 3/8 in ID × 1/2 in OD × 10 ft, rated to 480 °F and 40 psi, Shore A 70 hardness, peristaltic-pump compatible

  • FDA-compliant silicone for food and beverage contact
  • Withstands 480 °F maximum operating temperature
  • Rated for 40 psi working pressure
  • Shore A 70 hardness resists kinking and collapse
  • Compatible with peristaltic pump systems

FDA-Grade Silicone Tubing for Food and Beverage

This clear silicone tubing meets FDA requirements for dairy, food and beverage contact. It is designed for peristaltic pump use and general fluid transfer in sanitary environments. The 10 ft length suits bench-top and light production runs.

Thermals and Pressure Limits

The tubing withstands a maximum operating temperature of 480 Degrees F and a maximum operating pressure of 40 psi. Shore A 70 hardness provides firmness that resists kinking while maintaining flexibility for pump rollers. No jacket is present, so the silicone surface is exposed directly.

3/8 Inch ID for Targeted Flow Rates

The 3/8 in inside diameter and 1/2 in outside diameter define the flow capacity and fitting compatibility. Select this size when your system requires these exact dimensions; larger or smaller IDs will not match existing connections.

Highlights

  • FDA-compliant silicone for food and beverage contact
  • Withstands 480 °F maximum operating temperature
  • Rated for 40 psi working pressure
  • Shore A 70 hardness resists kinking and collapse
  • Compatible with peristaltic pump systems

Specifications

BrandZORO SELECT

Questions about this item

How do I install the 3/8 in ID silicone tubing onto a 1/2 in OD fitting without kinking it?

Warm the tubing in hot water, push it fully over the barbed fitting until it seats against the shoulder, then secure with a stainless-steel clamp; the common mistake is skipping the clamp and relying on friction alone.

What maintenance or replacement will the 10 ft silicone tubing need after extended food-contact use?

Inspect the clear tubing regularly for surface cracking, hardening above Shore A 70, or discoloration; replace the 10 ft length immediately if any degradation appears to maintain FDA compliance.

What is the first limit reached when the tubing runs continuously at 480 °F and 40 psi?

The 40 psi maximum operating pressure is the limiting factor; sustained pressure above this rating will cause burst failure before the 480 °F temperature limit is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.