We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear semi-flexible silicone tubing coil, 10 ft length

Usa Sealing

Usa Sealing ZUSA-HT-758 Semi-Flexible Silicone Tubing 1/4 in ID 3/8 in OD 10 ft

SKU CH-FFGS-H4421

Semi-flexible clear silicone tubing for beverage, dairy and water lines, 10 ft length with 1/4 in ID and 3/8 in OD, rated to 40 psi and 480 °F, Shore A 70 hardness, peristaltic-pump compatible

  • Handles 480 °F for high-heat lines
  • Food-safe silicone suits beverage and dairy use
  • 40 psi rating covers low-pressure systems
  • 10 ft coil gives flexible routing length
  • Peristaltic-pump compatible for precise fluid transfer

ZUSA-HT-758 Silicone Tubing for Food

This semi-flexible silicone tubing is designed for beverage, dairy, food and water applications. It meets the needs of operators who require a clear, food-grade hose for liquid transfer. The product is supplied in a 10 ft length and is compatible with peristaltic pumps.

40 psi Maximum Operating Pressure

The single specification that decides suitability is the maximum operating pressure of 40 psi combined with a maximum operating temperature of 480 Degrees F. These limits define the safe envelope for pressure and heat in any installation using this tubing.

Suits Low-Pressure Food-Grade Lines.

This tubing suits users who need a clear, Shore A 70 silicone hose for low-pressure food, dairy or beverage lines up to 40 psi. Buyers who need higher pressure ratings or reinforced jackets for hydraulic service should look at alternative products.

Highlights

  • Handles 480 °F for high-heat lines
  • Food-safe silicone suits beverage and dairy use
  • 40 psi rating covers low-pressure systems
  • 10 ft coil gives flexible routing length
  • Peristaltic-pump compatible for precise fluid transfer

Specifications

BrandZORO SELECT

Questions about this item

How does the 480 °F temperature rating hold up when the tubing is installed on a hot-water line?

The silicone material is rated for continuous use up to 480 °F, so it will not soften or degrade on typical hot-water circuits that stay well below that limit.

What does the 40 psi maximum pressure mean for a peristaltic pump setup?

At 40 psi the tubing can handle the discharge pressure of most small peristaltic pumps without ballooning or bursting.

Will the 3/8 in outside diameter fit standard 1/4 in barbed fittings without adapters?

Yes, the 1/4 in inside diameter slides over 1/4 in barbs, and the 3/8 in outside diameter matches common clamp sizes for a secure seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.