We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear polyethylene tubing coil 1/8 in ID 1/4 in OD 25 ft

Usa Sealing

Usa Sealing ZUSA-HT-3340 Tubing 1/8 in ID 1/4 in OD 25 ft

SKU CH-R24P-G28V6

Clear polyethylene tubing handles beverage, food and water lines at up to 290 psi and 140 °F

  • ColorClear
  • Clear polyethylene tubing for beverage, food and water lines
  • 25 ft coil of 1/8 in ID, 1/4 in OD for flexible routing
  • Rated to 290 psi and 140 °F for reliable service
  • Shore D 45 hardness resists kinking and chemical attack
  • Peristaltic-pump incompatible — choose alternate tubing for pump use

What this tubing is and who it suits

This clear polyethylene tube has a 1/8 in inside diameter and a 1/4 in outside diameter supplied in a 25 ft coil. It is rated for a maximum operating pressure of 290 psi and a maximum temperature of 140 Degrees F. The material carries a Shore D 45 hardness rating and is noted as chemical resistant. It is intended for beverage, food and water transfer applications where those limits are acceptable.

What to verify before ordering

Confirm that your system operates at or below the 290 psi pressure ceiling and the 140 Degrees F temperature ceiling. Ensure the 1/8 in ID and 1/4 in OD match the fittings or barbs you plan to use. The tubing is not compatible with peristaltic pumps, so avoid specifying it for that duty. Chemical resistance claims should be checked against the specific fluids in your process.

Behaviour under sustained load

The Shore D 45 hardness gives the tube enough rigidity to hold shape during continuous pressurised flow up to the rated limit. Polyethylene construction resists chemical attack over long exposure periods when the fluid is compatible. The 25 ft length provides a single uninterrupted run for installations that need minimal joints. Performance remains stable as long as pressure and temperature stay within the stated maximums.

Highlights

  • Clear polyethylene tubing for beverage, food and water lines
  • 25 ft coil of 1/8 in ID, 1/4 in OD for flexible routing
  • Rated to 290 psi and 140 °F for reliable service
  • Shore D 45 hardness resists kinking and chemical attack
  • Peristaltic-pump incompatible — choose alternate tubing for pump use

Specifications

ColorClear
BrandZORO SELECT

Questions about this item

What comes with the 25 ft length and do I need separate fittings?

The package contains a single 25 ft coil of clear polyethylene tubing with 1/8 in inside diameter and 1/4 in outside diameter; barbed or compression fittings for those dimensions must be purchased separately.

Should I choose this tubing or a different hardness for my peristaltic pump?

This tubing has a Shore D 45 hardness and is marked not compatible with peristaltic pumps; select a softer, pump-rated grade if you need roller-pump service.

Will the 290 psi rating hold at the 140 °F maximum temperature in my hot-water line?

The 290 psi maximum operating pressure applies at lower temperatures; at the 140 °F limit the allowable pressure drops, so derate the line accordingly for hot-water use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.